WhatsApp calls do not connect after upgrade 2.5.2 -> 2.6.0
-
Did some further investigations: This is clearly a bug. If the captive portal is activated on the interface, no WhatsApp calls are possible. As soon as captive portal is deactivated (or the client IP is in the list "allowed IP addresses") WhatsApp works fine.
My problem: I can't just turn off the captive portal, this will cause a loss of all revenues ...
Anyone an idea for a workaround?
Best regards,
Volker W
-
Check out the captive portal sub forum.
The issue isn't present on ordinanry LAN interfaces that uses the 'pf' (sense) firewall, only on interfaces that uses ipfw (and pf). pfSense uses ipfw only on the captive portal interface(s).
And yeah, looks like it's 'TCP only' for now. -
A patch is incoming we are testing options internally now.
Steve
-
@stephenw10 Steve, any idea when this patch will be available? We operate in 184 refugee camps in Germany and refugees are coming from Ukraine. It would be more than a pity if they can't use WhatsApp and such to call their families.
-
We are testing what we think will be a final patch now.
When we are confident it works for more complex setups it will be made available as one of the recommended patches in the system patches package.Steve
-
@stephenw10 patiently waiting for the patch.. it is always good to test before upgrading....tested in my lab environment immediately after the release, and experienced this problem.
-
@colleytech Patch is ready, check System_Patches package
-
@colleytech Yep, we did also test 2.6.0 before we started the roll-out. However, we did not detect the problem that ICMP/UDP is blocked when using the captive portal. Bad luck. Next time we will wait longer before we upgrade ...
-
Yup, should be a system patches package update available that contains this as a recommended patch.
Please test it if you're able and let us know if anything is still not working as expected.
Steve
-
@stephenw10 Steve, the lab test of the patch is working fine. So we're rolling it out to the various locations tonite. Will let you know if there is any feedback from our sites. Thanks alot so far !!!
-
Awesome, thanks for testing/feedback.
-
@stephenw10 Steve, first feedback from a handful of sites is also positive! WhatsApp calls work now.
-
@refugeesonline said in WhatsApp calls do not connect after upgrade 2.5.2 -> 2.6.0:
@stephenw10 Steve, the lab test of the patch is working fine. So we're rolling it out to the various locations tonite. Will let you know if there is any feedback from our sites. Thanks alot so far !!!
Sorry because my stupid question, how can i apply the patch, i had upgraded to 2.6 and whatsap and telegram calls no longer work on wifi network behind pfsense captive portal, it's hard work back to version 2.5, i installed the system patch..and then.?..
thanks, sorry because my english best regards -
@stephenw10 working fine in my lab... thanks for the patch
-
@luisenrique Install the current System Patches package (2.0_4)
Then open Sys > Patches and apply the captive portal patch:
Then reboot.
Steve
-
@stephenw10
done!
thanks whatsapp/telegram voice and video calls are working, i hope in a near future pfsense vertions fix it bug natively. thanks again
-
Yes, it will be fixed in the next update.
-
L luisenrique referenced this topic on
-
@stephenw10 thank you very much it is fix
-
After i do insert ip address in allow capture portal, i have success in calling whatsapp.
-
With these networks white listed, the captive portal clients do not need to login to the portal before they use app like Whatsapp-"phone".
Is that what you want ?
