WhatsApp calls do not connect after upgrade 2.5.2 -> 2.6.0
-
@stephenw10 Steve, the lab test of the patch is working fine. So we're rolling it out to the various locations tonite. Will let you know if there is any feedback from our sites. Thanks alot so far !!!
-
Awesome, thanks for testing/feedback.
-
@stephenw10 Steve, first feedback from a handful of sites is also positive! WhatsApp calls work now.
-
@refugeesonline said in WhatsApp calls do not connect after upgrade 2.5.2 -> 2.6.0:
@stephenw10 Steve, the lab test of the patch is working fine. So we're rolling it out to the various locations tonite. Will let you know if there is any feedback from our sites. Thanks alot so far !!!
Sorry because my stupid question, how can i apply the patch, i had upgraded to 2.6 and whatsap and telegram calls no longer work on wifi network behind pfsense captive portal, it's hard work back to version 2.5, i installed the system patch..and then.?..
thanks, sorry because my english best regards -
@stephenw10 working fine in my lab... thanks for the patch
-
@luisenrique Install the current System Patches package (2.0_4)
Then open Sys > Patches and apply the captive portal patch:
Then reboot.
Steve
-
@stephenw10
done!
thanks whatsapp/telegram voice and video calls are working, i hope in a near future pfsense vertions fix it bug natively. thanks again
-
Yes, it will be fixed in the next update.
-
L luisenrique referenced this topic on
-
@stephenw10 thank you very much it is fix
-
After i do insert ip address in allow capture portal, i have success in calling whatsapp.
-
With these networks white listed, the captive portal clients do not need to login to the portal before they use app like Whatsapp-"phone".
Is that what you want ? -
If the provided patch is applied to 2.6.0., WhatsApp is working also without adding those networks in the section "Allowed IP addresses". For example, if you want to use the Captive Portal function.
-
@refugeesonline said in WhatsApp calls do not connect after upgrade 2.5.2 -> 2.6.0:
If the provided patch is applied to 2.6.0.,
Exact. without the patch, UDP and ICMP traffic was 'stuck'.
Adding networks to Services > Captive Portal > ZONE > Allowed IP Addresses wouldn't help you to solve that issue.
So, applying the patch is needed to give the captive portal network access to the Internet.
Adding networks to Services > Captive Portal > ZONE > Allowed IP Addresses will bypass the captive portal authentication for these networks/IPs.
This is not related to the subject : "WhatsApp calls do not connect after upgrade 2.5.2 -> 2.6.0"
@Diego-de-Santis
Again : is this what you want ?
And, for my own curiosity : why ? -
@luisenrique Thank you, after installing the patch the issue has been resolved. Hopefully, it will be fixed in the next update.
-
stephenw10
Thanks for your guide. I followed your steps, by installing the recommended system patch and also applying the custom patch.
Whatsapp calls now works fine on my Pfsense 2.6.0
-
L luisenrique referenced this topic on
-
L luisenrique referenced this topic on
