Installation hangs HP Prodesk 600 G5
-
Hmm, well you could try:
set i915kms_load="YES" set drm.i915.enable_unsupported=1 bootIf it has an i915 supported graphics chipset that may work.
See this doc.
Steve
-
@stephenw10 hey thanks once more for your help.
I tried the setting you provided, however my system gets stuck every time at the same line…
Strange, because I have set up different systems without a single problem. I am really happy with the pfsense system but it just seems not to work with this hardware: HP prodesk 600 g5, intel core i5-8500 with integrated graphics… would it be an option to add another graphic card or serial bus to avoid the video-related error? -
It's certainly worth trying if you have access to one.
It seems more like an UEFI issue though. -
Any update on this? Same issue with HP Prodesk 600 G5 i5 9th Gen.
TIA -
It fails to boot the installer? Legacy and EFI?
-
@stephenw10 Yes, I did both but no success.
-
Where does it fail booting legacy?
-
@stephenw10 I tried 2.4.5 p1, and this is my error. Is it Video issue or EFI BOOT?
-
That's still booting EFI, or at least trying to use the EFI console. Does it not boot legacy differently?
-
@stephenw10 I tried both ways but same issue.
I read from other forum, this like of error works on previous version of pfSense like 2.4.2 or 2.4.3-development versions.
Right now, I'm trying to find the oldest version of it. Do you have link of the archived of all previous stable version of pfSense?
TIA -
You tried the various bootloader console suggestions above in this thread.
-
@stephenw10 I tried already before I replied on this post. No success.
