Pppoe multi ip problem with 2.0.1

[AndreasSchneider]

yes I have read this

but is a pppoe mit mutiple IP's a MLPPP Configuration?
Should I configure for each IP a PPPoe connection?

in Endian I configure 1 pppoe per vdsl öline and assign the ip's ….

I think that the pppeo connection on the 8IP doesnt work

Internet -> Modem (Bridge) ->[WAN-Interface (PPPoE) 8IP->    PFsense1  -> LAN-Interface 192.168.1.1] -> Webserver1 (int:192.168.1.10)
                                                                                                                                              -> Webserver2 (int:192.168.1.11)
Internet2-> Modem2 (Bridge) ->[WAN2-Interface (PPPoE 1IP -> PFsense1 -> LAN-Interface 192.168.1.1] ->  Webserver3 (int: 192.168.1.13)

[Metu69salemi]

I don't have pppoe environment by myself so i can't walk you throuh.
Can you with virtualIP's first and if it doesn't work straight then you might need more pppoe connections

[AndreasSchneider]

OK i try .. give response in 10/20 min

here are is snap from the ppp log

Jun 19 16:27:59
ppp: process 27351 started, version 5.5 (root@FreeBSD_8.0_pfSense_2.0-AMD64.snaps.pfsense.org 10:25 12-Oct-2011)

Jun 19 16:27:59
ppp: web: web is not running

Jun 19 16:27:59
ppp: [wan] Bundle: Interface ng0 created

Jun 19 16:27:59
ppp: [wan_link0] Link: OPEN event

Jun 19 16:27:59
ppp: [wan_link0] LCP: Open event

Jun 19 16:27:59
ppp: [wan_link0] LCP: state change Initial –> Starting

Jun 19 16:27:59
ppp: [wan_link0] LCP: LayerStart

Jun 19 16:27:59
ppp: [wan_link0] PPPoE: Connecting to ''

Jun 19 16:28:08
ppp: [wan_link0] PPPoE connection timeout after 9 seconds

Jun 19 16:28:08
ppp: [wan_link0] Link: DOWN event

Jun 19 16:28:08
ppp: [wan_link0] LCP: Down event

Jun 19 16:28:08
ppp: [wan_link0] Link: reconnection attempt 1 in 1 seconds

Jun 19 16:28:09
ppp: [wan_link0] Link: reconnection attempt 1

Jun 19 16:28:09
ppp: [wan_link0] PPPoE: Connecting to ''

Jun 19 16:28:18
ppp: [wan_link0] PPPoE connection timeout after 9 seconds

Jun 19 16:28:18
ppp: [wan_link0] Link: DOWN event

Jun 19 16:28:18
ppp: [wan_link0] LCP: Down event

Jun 19 16:28:18
ppp: [wan_link0] Link: reconnection attempt 2 in 4 seconds

[AndreasSchneider]

I think virtual IP work only when the ppp connection is up … but that is the problem .. it don't come up (Icon in Dashboard is green but Log say no!)

[stephenw10]

You need to use virtual IPs but keep just a single pppoe connection I believe.
There are quite a few posts about this.
An old post (2007!) but outlines the basics: http://forum.pfsense.org/index.php/topic,5253.0.html

Steve

[AndreasSchneider]

I read this article and add all IP to ARP in virtual IP
still the same
ppp log says LCP down an no Gatway is assigned

[stephenw10]

Hmm, I'm a bit confused, your ascii diagram is a bit mangled on my 1024*768 display.

So you have two pppoe connections on this box?
One 'GREEN' which is working OK and the other, VTX1, is not connecting, yes?

I think you should remove all the virtual interfaces and try to get it connected with one IP first.

Steve

[AndreasSchneider]

Sorry about the "confusion"

Yes "Green" is working … this is the 1 fixed IP line

VTX1 doesn't work (the 8 IP line).. the problem from VTX1 is it don't goes "up" fully ... it doesn't receive a IP
it also doesn't go up with 1 single IP when I only setup pppoe without GREEN and without virtual IP

at home I have from the same ISP like VTX1 a 1 fixed IP line with pfsense 2.0.1 without problems

[stephenw10]

So what is different?
Possibly with one IP they send it to you via DHCP but with a group of IPs they are routing to you or you are required to set the IP statically.
This could be a question for your ISP.
Presumably it worked OK in Endian?

Steve

[AndreasSchneider]

In Endian it works well… I haven't defined all 8 IP's because I dont use it