Pass specific IP through to LAN, port forwarding, firewall rules

[Konstanti]

@akjim

We have to start over

1. remove and disable all that in the pictures ( this is wrong)
2. create port forwarding for 6281 (nat / port forwarding)
3. check that the rule on the wan interface also appeared
4. try to connect

how is port forwarding configured on the router ?

[AKJim]

@konstanti said in Pass specific IP through to LAN, port forwarding, firewall rules:

@akjim

We have to start over

1. remove and disable all that in the pictures ( this is wrong)
2. create port forwarding for 6281 (nat / port forwarding)
3. check that the rule on the wan interface also appeared
4. try to connect

1. Yes, I have removed all rules, then rebooted the device.
2. Yes, done
3. Yes:
4. Still rejected by device firewall:

[Konstanti]

@akjim
show me the rules on the wan interface

[AKJim]

@akjim Port forwarding on the router is good, this traffic is being stopped by the netgate appliance only. If I remove the netgate appliance (pfSense) then everything works correctly.

[AKJim]

@konstanti said in Pass specific IP through to LAN, port forwarding, firewall rules:

@akjim
show me the rules on the wan interface

[Konstanti]

@akjim
this is not what we need

i need
/firewall/rules/wan

[Konstanti]

@akjim

and I need a full log entry.
to see what pf is blocking
Status/System Logs/Firewall/Normal View
where you will see :interface, source, destination, port, protocol

[AKJim]

@konstanti said in Pass specific IP through to LAN, port forwarding, firewall rules:

@akjim
this is not what we need

i need
/firewall/rules/wan

[Konstanti]

@akjim

here's what I need
the picture with all the rules
for example ,

[AKJim]

@konstanti There is only this one, single rule ..... !

[Konstanti]

@akjim
firewall log ???

[AKJim]

@konstanti Sorry for slow responses, the forum limits me as a new user to 1 post every 3 minutes. Here is the firewall log:

[Konstanti]

@akjim
64.4.23.126 !!!!!!! - port forwarding rule
error in source address
64.4.231.126 - block !!!!!

[AKJim]

@konstanti said in Pass specific IP through to LAN, port forwarding, firewall rules:

@akjim
64.4.23.126 !!!!!!! - port forwarding rule
64.4.231.126 - block !!!!!

I am an idiot!!! I see that now, and after making the address correction it is working properly.
THANK YOU so much for your guidance and assistance!!!