@mrhomelabber Bump

@rivarda I have no idea.

@perfectbake420 said in Bringing in second Static WAN, need to route to 1 device: Do you know of any issues with 2.5.2 RC since it is not a stable release? No. There might be some threads in the upgrade section or some tickets in Redmine: https://www.redmine.org/versions/84.

@vlan1 said in Mapping WAN IP's from a VPS directly to local Host ?: The question for me is, how do I assign the pfsense my WAN IP's ? The WAN IPs have to stay on the VPS, where you run an OpenVPN server. Your pfSense connect to this server and set it as default gateway. So any outgoing upstream packet from your home is dericted over the vpn and goes out to the internet with the static public IP of VPS. The other way around you can use the public IP for your services like you do already, but incoming traffic on the VPS is forwarded directly to your server at home. So you have only one time to nat the traffic in each direction like you was having the VPS public IP at home.

@ironwood Yes, if you have a policy routing rule on an interface you have add an additional route for permiting internal traffic above of it. This also concerns access to services provided by pfSense itself like DNS.

We haven't seen any failures with UDP in our internal testing of reply-to on 2.5.2-RC. The fix in pf was not specific to TCP, so it's unlikely to be related to whatever problem you're seeing with that PBX.

It's probably due to https://redmine.pfsense.org/issues/11296 You can revert the change there or disable gateway monitoring/monitoring actions for the gateway which is the target of the route and see if it helps.

Please Disregard. I forgot to configure my NAT OUTBOUND.

So your policy routing and forcing traffic out wan 1?, because you have not failed over. So yeah how would you get to wan 2 IP something.. What are the rules on your lan - did you set a gateway forcing traffic out that gateway? https://docs.netgate.com/pfsense/en/latest/multiwan/policy-route.html#bypassing-policy-routing

I created one, this seems like it would be a useful feature: https://redmine.pfsense.org/issues/12077

@daddygo I thank you for the answer.

@miesje said in Dual WAN IP routing: I had to remove the dhcp gateway WAN02 from the WAN02 rule, to default. Didn't notice the gateway setting before. No, the gateway option in a filter rule is only meant for policy routing and that is mostly not wanted on incoming traffic.

@pete35 Windows firewall blocks SMB from outside it's own subnet by default..... Did you check that?

Ok that is a start. So you have a vpn to 192.168.4? You have another connection in this 192.168.4 network along with your wan? You are just routing without vpn at 192.168.4 router to 192.168.1? via this public IP? And this 192.168.4 network also has a wan IP in this /29 public network? I REALLY suggest you get with your company IT dept about adding a firewall to your site, especially since it seems they don't even allow you access to your sites router?

@disakos Take a look here.