What OS is your web server running.  I'm guessing Server 2003??  Ensure that under directory security on that website you have the correct information for anonymous access.  Make sure that no other check boxes are marked.

1: Well it depends on your setup.
If your client can handle oversized frames you should not have to change the MTU.
If the driver of your em-NIC's cannot handle oversized frames, you would have to change the MTU on the other side of the link, so no oversized frames arrive at your end.

2: The problem is, that VLAN-tags add 4bytes to every frame.
–> frames can become bigger than the allowed maximum.

Most drivers can handle this, but some have problems.

I am happy to hear that. Welcome back :-)

Hi,

Works for me pretty well. I'm running 2.0-AA tho…

cheers,

I was trying to do the same but cant find rsh: /usr/bin/rsh: Command not found.

How can I install rsh?

cconk01
Do the modems get static IP's?
No, dhcp , from isp
WAN has other adress IP,88.83.x.x dynamic adress (public adress)
the LAN side of modem is typically static and usually is 'builtin' 192.168.254.254

ampwifi
Great ide with extra hop/gateway (linksys) though excessive amount of extra material.
The bridge balancing sounds sound enough -though not really acquinted to it - so it's just a pool of mac -adress You can send through
like 'smart vektor routing stuff ? ' - must read more about it later :

http://doc.pfsense.org/images/d/d0/MultiWanInterfaceWAN2.png

http://doc.pfsense.org/index.php/Image:MultWanRouterBridge1.png

Thank You all for Your reply :)
Regards
Tom-Pele

PFSense just has some awesome developers.  If you want to say thanks, donate to the project…it lets the people who do the real heavy lifting keep making pfsense even better.

What are you trying to say us?

my issue is rather different, I corrected it in config.xml but it still does not work (I can not apply any changes through web-interface). This box is located far away - so I was stupid doing that, I am screwed up now -(

So in a diagram:

internet
                ¦
                ¦
                ¦
            (WAN) - public IP
          modem
            (LAN) - 192.168.0.1
                ¦
                ¦
                ¦
            (WAN) - 192.168.0.2/24
          pfSense
            (LAN) - 172.16.0.1/24
                ¦
                ¦
            clients

You want to access the modem on 192.168.0.1.
You should just be able to type this IP in the webbrowser and it should work.

Sorry, I meant that I would run a capture from the system that's running Hobbit.

PS - Didn't realise that Hobbit is now Xymon - I'll look at the new version :)

Set up a syslog-server.

This thread might also interest you:
http://forum.pfsense.org/index.php/topic,8358.0.html

I wouldnt use PPTP because it's outdated and shouldnt be used in a new setup.
Try OpenVPN since it's really easy and there are already how-to's around.
Take a look at the OpenVPN subforum.

In this thread are some links on where to find what:
http://forum.pfsense.org/index.php/topic,7001.0.html

I observer what is posted in the first post with the embeded CF image.

Afterthat I gave up and installed from CD. It is working now. I hade a differenet issue now, and I have opened a topic in the hardware section.

Thank you all very much.

If I remember correctly from previously issue, SLBD can randomly run wild. After a reboot it could run normal for weeks.
As 1.2.1 is to be released i would recommend a upgrade.

@GruensFroeschli:

If you get an IP per DHCP your client will have the same DNS suffix.
Usually if you try to ping just the first part withing the same "subdomain" it will work.

ie: psymia.mine.nu is my domain.
a server is called whitemage –> whitemage.psymia.mine.nu
a client is called redmage --> redmage.psymia.mine.nu
Now if i ping on redmage "whitemage" it will work.

Alternatively you could enter your own names in the DNS-forwarder.
some screenshots to clarify:
@http://forum.pfsense.org/index.php/topic:

http://forum.pfsense.org/index.php/topic,9440.msg53573.html#msg53573

Ah ok, thanks, before it wasn't working by only hostname but now it works.

Now im off to learn about all these different VPN terms so I can try to setup a VPN next!  :o