What version of OS X Server? What is your end goal?  Not what certificates you think you want where, but what do you want to be able to do with them? Certificate handling in OS X Server has always been, shall I say, squirrelley.

check out the zillion other threads with the exact same question on this subsection of the forum: https://forum.pfsense.org/index.php?board=60.0 (search: multi-wan ) or https://forum.pfsense.org/index.php?board=21.0 (search: squid) you'll soon notice that it's a pain and not "easy' :))

Jumbo frames are totally pointless on any remotely modern network. Building TCP/IP headers for lots of packets hasn't been a CPU bottleneck issue for ages and routers can do much more PPS now than they could 10 years ago. Same for switching hardware.

I used  : pkg install perl5.20-5.20.2

Either it has some CPU/cache/memory hardware problem that is causing page table references or some critical bit of the kernel got corrupted on the CF card - "page fault while in kernel mode" should never "just start happening". The easiest thing to do is to take out the CF card and re-write it a new good pfSense nanoBSD image. If that works then you are in luck. If the CF card gives errors when writing it, then you know to get another CF card. If you still get "page fault while in kernel mode" on a clean pfSense boot, then there has to be some hardware problem on the board. Since the CPU, memory is all fixed to the Alix board there is not much benefit in knowing if it is CPU or memory or…

Did you get a chance to power cycle everything, if so did it "fix" the problem?

I am using 2 to test currently, although will be using 3 when I go live. At the moment I have set the non-active one to not be in the "allconnections" gateway group so only the 2 active ones are in there.

Yeah, I think I might do that

also posted here: https://www.reddit.com/r/PFSENSE/comments/320qhb/killed_out_of_swap_space/ which is where I originally replied.

@Codewarrior: Hey, Pretty new to pfsense and I'm honestly a bit confused. I was trying to connect a test computer to a domain that is outside our local network. upon typing in the domain I get prompted to login upon logging in, I get an error stating "The network path was not found" (I get this with fake credentials or with real ones) This only happend when its behind pfsense. If I connect it directly to the internet I can connect without a problem. Windows firewall is disabled and I have the DNS server setup as the domain server as well. Most settings are default and not alot has been changed. Pinging the domain's address connects to the correct IP address. Screenshots http://d3gq0spernq6eg.cloudfront.net/9n91y.jpg (Censored for anonymity) http://d3gq0spernq6eg.cloudfront.net/y9f9c.jpg http://d3gq0spernq6eg.cloudfront.net/w11vc.jpg Any assistance or links to appropriate documentation would be greatly appreciated! Solved. Had nothing to do with Pfsense was a problem on the Windows server with file and printer sharing being disabled on the network adapter Works fine after enabling it.

@irj972: With appropriate hardware you see a 10%hit on your non vpn throughput I'm on a 120/10 and see 111/9 usually aes256 blah blah aes-ni on a c2758 board etc Right.  I've got a c2558 board and think I'll be OK in that regard.  I'm more concerned with the speed of the Air VPN servers.

Well I guess if it's on a separate virtual interface and only that interface has offloading enabled in the host then maybe. The offloading options in pfSense are global though so I would expect it to affect all servers equally. Also the slowing down described here doesn't sound like the 0.4Kbps described in the known symptoms. However since this is a known issue I would definitely be disabling off-loading everywhere anyway, that's why I linked to it. I don't use Xen so I'm completely open to being wrong here.  ;) Steve

It's a pretty much accurate comment.  Though the resource in the /documentation is using the traditional way. :)  https://doc.pfsense.org/index.php/Using_Captive_Portal_with_FreeRADIUS#CaptivePortal_Self-Registration:FreeRADIUS.2B_MySQL