@bossaops Ou yeah, thats for sure. My ONT is very closed. But it gives better speed than my pfsence Box. (Sadly) Does not like to share any thing. Thats a NAT address. Btw when i used to use openwrt there was not any problem.

@wizardofwhere I think you have the pfsense plugged into the wrong place. I would have modem, to pfsense wan, pfsense lan to switch, vpn is going to take some work because that also needs wan access. You probably need the linksys plugged into same switch and rules on the pfsense to forward traffic for the vpn.

It's unusual because it's not intended for that role (yet, at least) -- adding functions which are useful outside of the firewall is out of scope, even if the cert manager is convenient to use.

@nerlins said in Another subnet sanity check.: What IP address do I set for Pfsense itself It will need an IP on each subnet if the subnet is to communicate with/through the pfSense. (the printer's gateway is the pfSense IP in that subnet)

@summer said in SG-3100 notification after update 21.02: edits something like "compilation" It's PHP. It's an interpreted language. Not compiled. It's the "Basic" of the last decade. It looks easy, because it is.

@jimp Thank you, all good now. Solved.

@viktor_g Thanks for your help.

Update: I noticed that many of the logs were not updating and there were 8 zombie processes shortly after a fresh reboot. Decided to nuke the logs and reboot: find /var/log -type f -exec rm -f {} ; && reboot Gateways came back up after the reboot, then went back down. WTH? Also still a very odd lag on UI when saving changes.

@stephenw10 Thank you. It was hardware. Replaced SSD resolved it.

@lecygne After all these years pfsense developers are still not convinced that "taking master role too early" is an issue in some cases!

@bingo600 said in Firewall logs - showing other: Re ISP - The Gateway monitor is prob pinging the isp def-gw. how can I confirm this ? please note I am still learning and my knowledge is very limited at the moment

https://forum.netgate.com/topic/137938/shaw-300-issue-with-arris-xb6-modem-severe-intermittent-wan-slowdowns/9?_=1614764271055 Sounds similar to issue I had couple years ago with Shaw cable. Not sure if it was modem or moca filter that resolved as both were done at same time.

@viktor_g A completely clean install on version 2.5.0-RELEASE

@zacaustin I have a Sony Bravia and a sg3100, it’s on my guest vlan It works perfectly hardwired.. I have a Ubnt nano mounted directly above it which also works fine.. It works on just the out of box dns resolver for me and also by setting it up with next dns google blocking... where it’s pushed dns servers by pfsense and it blocks google services

@gertjan I mis-typed. I running 2.5.0 on top of freebsd 12.2. https://docs.netgate.com/pfsense/en/latest/releases/2-5-0.html