@tobiasfrajka I feel your pain. I had similar issues with trying to cast Youtube from phone on one subnet to my xbox on another subnet. Of course I made sure it worked when on the same subnet. Followed all the tutorials, videos, threads and suggestions, and had any-any rules on both networks but I eventually gave up. I don't know if I was missing something or if something has fundamentally changed with how casting, SSDP/mDNS works and whether the solutions people once had success with is still relevant? I was actually more interested in understanding why it didn't work than anything else, but never got to the bottom of it. I was even trying to compare packet captures of the working setup on the same subnet vs. the broken one, but I had no idea what the packet process should look like when it's working. I wish someone with deeper knowledge could shed some light on that or how to troubleshoot such issues.

@jwj, I suggest you watch The Social Dilemma on Netflix. It's exactly what you're talking about. [image: 220px-Social_dilemma_xlg.jpg]

Turns out global vNet peering on the LB function of Application Gateways is not supported. This is a Azure Application Gateway limitation and not related to Pfsense: https://docs.microsoft.com/en-us/azure/virtual-network/virtual-network-troubleshoot-peering-issues. Posting this on 10/5/2020 if anyone else runs into this issue, I hope this helps

Script de conexión --> #BEGIN EDIT /bin/echo "Client $common_name from $trusted_ip connected @ date" | /usr/local/bin/mail.php -s"OpenVPN Connection Beginning" #END EDIT Script de Des-conexión --> #BEGIN EDIT /bin/echo "Client $common_name from $trusted_ip disconnected @date" | /usr/local/bin/mail.php -s"OpenVPN Connection Ending" #END EDIT Estos scripts funcionan perfectamente, acabo de testearlos. Así debería quedar el script "openvpn.attributes.sh" [image: 1601906994131-30c42a3b-68e4-4c13-a83e-828d0a586bcc-image.png] Saludos

Do all interfaces in the bridge fail to hand out DHCP leases? Or just this new one? If the pcap shows the DHCP offer leaving the member interface either it's not reaching the client or the client is rejecting it. The client and server are using the same OUI there, they are both virtual devices? Something in ESXi blocking/dropping it? Steve

I managed to fixed the problem, turns out the VM host hadn't been rebooted since before outage, so I thought I'd give that a shot, and it seems to have fixed the problem. Maybe the physical NIC was left in some partial state or something. Thanks to everyone who helped. SOLVED!

What are you running pfsense on? When you say you replaced the modem, it really was a modem.. Or a gateway (modem/router combo) What is the model number? What upload speed to you have? Your pfsense wan is pubic IP or rfc1918? I run uploads all the time, plex server serving up to friends and family.. I just uploaded over 45GB of stuff for just the other day for my friend.. Looks like I do over 400GB a month [image: 1601774020482-400g.png] Never seen an issue.. The other day when I was uploading, pretty much pegging my upload pipe for hours.. No traffic shaping, no need to really do anything at all.. So to try and figure out your issue going to need some more info. You say you start seeing packet loss, well yeah if that happens at some point pfsense is going to kill the connection on its own once it thinks its gateway is offline.. Can we see your quality graph when this happens... For example you can see here while my response time did go up while uploading that large 45GB of data.. There was no packet loss. [image: 1601774354437-upload.png]

Well while your connected it would be only you, but would assume this would rotate like every 24 hours or something. And either way the IP space would be the vpn space, and as they clearly state on their website they don't log or work with any government agencies... And do not profit in any way with the GBs of traffic their users use.. That $29 for life gives them plenty of profit ;) why would they have any need to monetize whatever your doing via their vpn? ;) Most likely even that single IPv6 they give you is only being used by you.. So unless they handing out ULA address space and natting it?? Even that single IPv6 give you is not "shared" like your typical IPv4 vpn..

Thanks for the info folks. The reference to the above video about running 'fsck' in single user mode helped. That solved the problem! Now the data streams nicely to the syslog server. Didn't see much error correcting but apparently it was enough. @jimp Normal shutdown... yes. The question was why though and why no logs were flowing.

@AKEGEC I asked them that and they said the modem had been up for 20+ days. That matched up with the uptime in the GUI. As for weather, at that time it was really calm and moderate. No storms in the area. (That said I will never count out squirrels as a culprit. :)

I suggest that you only visit Netgate official website. docs.netgate.com forum.netgate.com

@Draghmar said in Changing favicon: because I was rather asking about built-in solution Noop. "If it isn't in the manual (there is one) - it isn't possible" ^^ If was talking about branding uniquely to mention a possible reason why you shouldn't change the fav. Anyway, you have some options at your disposal now.

N280 actually, yes 32-bit. I will look into getting new hardware once I finish the latest network project. I don't want to add new hardware as another variable for troubleshooting. Oddly enough, the "updating status" has always been successful and it has not changed with the addition of these DNS servers. 2.3.4 seems to be the latest unless I allow for non-stable updates. " 2.3.4-RELEASE-p1 (i386) built on Fri Jul 14 14:53:03 CDT 2017 FreeBSD 10.3-RELEASE-p19 The system is on the latest version"

@Cool_Corona I already tried this option creating the file, but the problem was the same, now I used the system -> Advanced option. I will see if will work. When finish the tests I will give a feedback for you. Best Regards

@GregTheHun said in Unable to enable DHCP server for OPT1 interface: my interfaces to have Static IPv4 addresses You can even disable / remove the IPv4 address on your interface. For "DHCPv6 Server & RA" to work, you should have a valid IPv6 set up. If your question was remotely related to the subject of this thread, you have set a /128. Which leave zero space for a pool, so DHCP (V6) isn't possible. You didn't do that ?? Did you ? @GregTheHun said in Unable to enable DHCP server for OPT1 interface: I know for a fact that my OPT interfaces have DHCPv6 as the address method Show the details ?! : [image: 1601538848108-7d5ef558-6e83-4f06-be78-dfc2277f7545-image.png]