Thanks very much ! Based on the thread, my upgrade went perfectly. I'm up and running with no downtime at all. Keith

Six year old post but your research saved me tons of time. I've been scratching my head for days, contacting both Netgate and several syslog server software vendors to see why their viewer won't show messages actually showing up in Wireshark just fine. I got nothing until I found a simple workaround, just changing the listening port of the syslog server and making the device send to that port instead.

@thewismit could this be it? https://forum.netgate.com/topic/144636/sg-1100-intermittent-reboots

I'm always setting my ACPI power state on to "Power on" That way i'm sure my Fwall is starting after an AC (mains) failure Edit: You will like to try that by "pulling the AC or 12v plug" .... If the disk don't survive (UFS) , you i''l also know why ZFS is preferred ... /Bingo

An update to this - there has been no change/improvement to this with 2.5.0 nor 2.5.1.

@tgimagine Make sure no one has plugged the same cable into 2 ports on the switch or under a desk, try unplugging about half your computers/printers and see if the problem remains. If yes, plug the first half back in and unplug the second. APs, too. Process of elimination. Also, on the off chance it is the SG, take it off the net. Maybe bad NIC out of box.

@virgiliomi My problem seems different. Removing 127.0.0.1 from General | DNS Server and rebooting doesn't fix the issue. Stop pfBlockerNG and NTP peers show up. running 21.02.2 on SG-1100

Hello, I didn't consider it relevant but two of my potentially "problematic" systems, dc0 and dc1 (see original problem description) also run on vmware. Doing research I obviously stumbled upon the asymmetric routing problem but I honestly can not immagine how it could be unless it is internal pfsense routing. My setup has worked fine on 2.4.5 and 2.5 and I think also 2.4.4? I also think the underlying bug might be the same as https://redmine.pfsense.org/issues/11805

@eznightbringer ???? I have never heard of anything like that. Fibre has an incredible amount of bandwidth and the equipment connected to it shouldn't be doing anything like that. What happens if you connect a computer directly, without going through pfsense? What does speedtest show? What does your ISP say?

@lilang-maseng what happens when you test the authentication in Diagnostics > authentication

If anyone has had this issue - updating to the release version of 21.02.2 seems to have fixed it! I think it's related to this reported ticket: Regression #11436 Will report back if I see any further related glitches.

@pfgate said in pfSense 2.5.1 Announcement, Release Notes, Installation Instructions: I see that 2.5.1 is available in the GUI. I've poked around a little and can't find an announcement, any release notes, or installation instructions. I'm new here so I'm likely not looking in the right places. RedMine now shows 2.6.0 items on the roadmap page. Are 2.5.1 items now on a different page? Wonder if the News and Documents pages in RedMine might be a place to publish announcements, release notes, and installation notes. https://redmine.pfsense.org/projects/pfsense/roadmap I have 2.5.0 and have set up two WireGuard peers, with pre-shared keys. I think I read that I'd have to delete/disable the WireGuard server before upgrading to 2.5.1. That correct? Hi, maybe this is the right pace :) https://www.netgate.com/blog/pfsense-plus-21-02-2-release-and-pfsense-ce-2-5-1-release-now-available.html

@jimp OK, thanks for letting me know, I know you guys must be busy at the moment sifting through any possible bugs being reported. Thanks for the speedy point release, you guys must have been working hard, wasn't expecting to see it so quickly.

@gertjan said in Troubleshooting new pfsense 2.5.0 installation: the x.x.x.10 and x.x.x.20 are switch together Yes, both are switched together

@danielino1981 said in Multiple LAN on Pf Sense: I don't want the VLANs If you don't want to use VLANs, you'll need a separate interface for each LAN. The Qotom comptuer I use has 4 Ethernet ports, so I could have 3 LANs without using VLANs.

@gertjan Thanks

if you run status > filter reload does it fix it? i have had that issue consistently on 2 different Netgate products