@AK_4_Life said in Using Static ARP vs IPVLAN: you will get a new IP every time you connect to the WIFI. As mentioned by JKnott if you have devices that might use different macs, and not really allow for assignment of specific IPs that you can then filter or schedule in your firewall rules based on the IP, since it could change. The best solution here is to put these devices on a common network(ssid) and then you can create your rules for the whole network/vlan and not really care what specific IPs might be in use - because all devices on this network get the same rules regardless of their specific IP.

I would try vmstat -i and make sure you see interrupts on both queues on each NIC when it's passing traffic.

@droidus Enable console password under System --A Advanced --> Admin access [image: 1688367184569-0d6c8c3f-008c-4815-b52e-b132c41a5fd8-image.png] .. Scroll to bottom .. [image: 1688367196469-90e0ab80-570a-41ce-b194-de6f87bb5ffc-image.png]

@nima because I am in the middle of converting from using local.lan to home.arpa - When I created the new ssl cert I put both on their as SAN.. Was not sure if I had anything using the local.lan as yet... I could prob remove it as this point..

I'm not aware of anything in 2.4.4p2 but that was a long while ago, I may have just forgotten! There have been thousands of fixes since then.

@mauro-tridici you can not route a fqdn, you would route the IP or network that IP resides on.

@SteveITS said in Release notes for pfSense Plus?: @furom https://docs.netgate.com/pfsense/en/latest/releases/index.html#current-and-upcoming-supported-releases Thank you! Of all places i looked, documentation was not one of them :)

@CrowFather May have answered this on Reddit…? Just reinstall from ISO and restore your config backup. Fastest way forward.

@emefff That's kind'a as expected , based on my experience when upgrading to Plus 23.01 That's also based on FreeBSD v14 My home boxes uses i5-5250U , that CPU is to old to use the new "Speed/Power stuff" so those behaved as usual, using the "Old Power settings" But my i3 test box was "hit" , and was what i described in the thread i pointed to. /Bingo

Thanks a lot

@pimpmyrouter Yep agreed. SDWAN and Multi-WAN(with tiers) just isnt the same thing. But i dont think pfSense is meant to be in the SD space anyway.

So you mean the credentials pfSense uses to connect to the LDAP server? No, that is contained in the pfSense config. It would be rewritten from the config at boot or when any change was made to the authentication system.

@coxhaus said in 2.7 RC DNSresolver does not work with routed vlans on Cisco L3 switch: None of my Apple devices are responding on my Apple vlan What's your Apple vlan, a switch? Apple doesn't make any network switch...oh, it's a Cisco!

Not sure at this point. We'll update that ticket as we know more.

Yes it depends on the modem. If it has a route to the pfSense WAN you don't need to do anything. Some modems do not and require you NAT to their subnet so they can reply.

@leakin

I've found the answer,because the network burst every 3 minus. [image: 1688057503973-network-resized.png]

Hmm, do you have any traffic shaping enabled? I assume those are igb NICs?

@stephenw10 Thanks for your answer, I understand now the problem