@georgeman: https://atxfiles.pfsense.org/mirror/downloads/ Or any of the other mirrors. Still, I would suggest to troubleshoot the issue and get it fixed (if due to a bug) Thanks, i've been troubleshooting the issue for 2 weeks now and whilst i'm pretty sure it's a bug and will present it shortly, I need to get a working solution for my customer asap.

@cmb: That ATA error is likely because the drive is dying. Guessing it'll probably come back, might just not be hitting the part of the disk that's problematic post-reinstall for some reason. Maybe next power cycle or some future power cycle it comes back. Check SMART on the drive, though it being clean isn't necessarily indicative of no issue. I couldn't even check it, it has a output/input parse error. I believe my HDD died on it unfortunately. Every time I shut it down and try booting it backup I get a ton of errors and now when I tried turning it on I got kernel not found. I'm gonna replace the HDD/SATA cable and see what happens.

On #2, this is RRD objecting to time running backwards. The first timestamp is recent (May 10th), while the second timestamp is from back in January. It may be that the current time has not yet been set after boot. I see this happen with power cycling systems that do not have a battery backed clock. It goes away once NTP is synchronized.

up

Hello Fahim, Do your PPP logs give you any idea of the problem? can you post them here? Mike.

@coxhaus: I can run packet captures if it would help? Yes that would be telling. Filter on the IP of the TV.

Race conditions!

@dennypage: This might be of assistance for #2: https://forum.pfsense.org/index.php?topic=110043.0 Yep changing the ping payload fixed the issue.

@pfdigs: Working with the provider/carrier to provision fibre to building (upgrade from ADSL, yay!) and the initial question (before deployment) they've asked is "Can you confirm if a /31 will be compatible with your equipment for IP addressing?" We're using the SG-4860. Yes that would be fine.

I gave the answer to this in your other thread where you originally asked this question. https://forum.pfsense.org/index.php?topic=108668.msg605967#msg605967

After some time I have finally installed my ELK log system ( I need only to adjust the appearance ) and obviously  it doesn't log all traffic by default (states are not sent trough syslog) but you need to mark in every firewall rules "Log packets that are handled by this rule". I know that this thread is old, but it can be useful for those looking for logging states know this. PS: ELK seems hard to configure, but the result seems to be amazing  ;D

In PFSense 2.3.1 version, PHP have the updated time zones and the webConfigurator time is correct, but the console not, thus, the LOGs show the incorrect time…  :o I fix with this: mkdir zoneinfo cd zoneinfo wget http://pkg.freebsd.org/freebsd:11:x86:64/latest/All/zoneinfo-2016.d.txz xz -d zoneinfo-2016.d.txz tar xf zoneinfo-2016.d.tar cd usr/share/zoneinfo tar czf ../../../zoneinfo.tgz * cd ../../../ scp zoneinfo.tgz root@192.168.0.1:/usr/share ssh root@192.168.0.1 8 cd /usr/share/zoneinfo tar czf ../zoneinfo.bkp.tgz * mv ../zoneinfo.tgz . tar xzf zoneinfo.tgz After reboot… The file /usr/share/zoneinfo.bkp.tgz is a backup of original files.

For torrenting, since they'll use any and every port available, i'd specify the http/https ports in the floating firewall rules, and then traffic-shape the hell out of the subsequent catch-all.

Some (most? all?) vendor provided DSL routers are capable of being switched into bridge mode. Google your router make and model and "bridge mode"

tried that comes back with  error message  that  squid guard is only partially deleted, it shows up in the packages section with a red exclamation mark and does not run. likewise it appears in the list of packages but you cannot run or delete it ? with the red exclamation mark pics of the trouble makers [image: f66465b1-f8d5-4e0a-a0c3-a6e5938fbb7a_zpsjwirhodx.jpg] Wont run [image: 48de9d12-3818-40b5-8148-c74da1ec7966_zpspit1qnea.jpg] will not delete … will not reload Thanks

Hello. How Mail to multiple recipients, not only via shell https://forum.pfsense.org/index.php?topic=112360.msg625732#msg625732 System > Advanced > Notifications > E-Mail > Notification E-Mail address: set recipients with coma separator. destinatario1@servidor.com,destinatario2@servidor2.com,destinatario3@servidor3.com [image: notifier-to-multiple-mails-advanced-1.png] Save. And Edit file “/etc/inc/notices.inc” (about line 360), add:   $to = $config['notifications']['smtp']['notifyemailaddress'];   //Multiple recipientes   $to = preg_split("/[\s,]*(\,|\;|\:)[\s]*/", $to);   $to = implode(",",$to); [image: notifier-to-multiple-mails-advanced-2.png] Save and test: root# echo "multiple recipients" | mail.php -s"test multiple" At log: May 24 14:21:46    php-cgi  mail.php: Message sent to javier@javcasta.com,alguien-mas1@gmail.com,alguien-mas-2@gmail.com OK Note: (via: http://ehealth-aussie.blogspot.com/2013/07/pfsense-e-mail-alerts-sent-to-multiple.html ) For package Email-report, change in file “/etc/inc/mail_reports.inc” $address = $config['notifications']['smtp']['notifyemailaddress']; /* New lines start here */     $addr_array = preg_split("/[\s,]*(\,|\;|\:)[\s]*/", $address);     foreach($addr_array as $addr){           $mail->AddAddress($addr, "Report Recipient ".($addr_count++));     } /* New lines end here */ /* Comment out the line below */ //$mail->AddAddress($address, "Report Recipient"); $mail->Subject = "{$config['system']['hostname']}.{$config['system']['domain']} Email Report: {$headertext}"; Regards.