Hmm, so something dynamic that survives a reboot but is not in the config.

Hmm, hard to say then. It sounds like the network stack stopped forwarding but the kernel was still running. I guess I'd try again and grab logs covering the event. If it happens again. Steve

@jrey In installed the RC without any patch applied, IP list on graph was again mostly empty applied the patch (my modified one) as described above. IP's are listing fine again.. I'll go back after a bit of lunch and try the original patch, see if that is any different or works. (because that is/was likely something else) as the actual real lines needed to make it go are the same.

@johnpoz said in No Internet Access from LAN (Solved with last good config backup): And unless you setup ssl through the proxy it like 99.9999 going to be utterly pointless John, you make a valid point and to be honest, I have had this like like for years and glad you pointed this out to make me rethink its implementation. I do have an SSL for the the webgui but that's it. As I had said, this was a set and forgot but that turns to nonsense. Your https statement also punches me in the gut with reality...really appreciate the feedback. I shall remove...

Send me your order number or old NDI in chat and I'll check.

If you have a spare port you can bridge that to the VLAN to get that device onto it. But otherwise you'd need a VLAN capable switch somewhere, yes.

OK, thanks. Everything is being updated so that may just not have happened yet.

@othomas said in Web Configurator traffic is not being fragmented when it should be: User data TCP/IP over IPSEC, over IPSEC (again), then over GTP-U. We had to do MSS clamping down to 1280 bytes. ugghh - yeah that isn't fun..

Hi @stephenw10 , glad you liked it! I Opened a feature request at https://redmine.pfsense.org/issues/14923

2.7 was released in June. See: https://docs.netgate.com/pfsense/en/latest/releases/versions.html Currently the config version in 2.7 is the same as in Plus 22.05.1 so you can install 2.7 and import the config again. Downgrading directly is not supported at this time.

@chudak Well no, not really. Better to have it all in one place instead of many threads in many forum categories.

See: https://docs.netgate.com/pfsense/en/latest/services/snmp.html And the linked hangout: https://www.netgate.com/resources/videos-monitoring-pfsense-24-with-snmp The fan status probably isn't available since pfSense doesn't see that. Steve

I understand. Thanks for the feedback.

Link? A quick look into pricing looks like: https://shop.netgate.com/products/pfsense-software-subscription And Enterprise TAC at a home user, ok maybe if you need it?

Yes backup the config and try re-installing clean to be sure.

At the command line run: pkg-static install realtek-re-kmod Then: echo 'if_re_load="YES"' >> /boot/loader.conf.local echo 'if_re_name="/boot/modules/if_re.ko"' >> /boot/loader.conf.local Then reboot and check the boot logs show the 1.98 driver: re0: <Realtek PCIe GbE Family Controller> port 0x1000-0x10ff mem 0xf7a00000-0xf7a00fff,0xf7900000-0xf7903fff irq 16 at device 0.0 on pci1 re0: Using Memory Mapping! re0: Using 1 MSI-X message re0: ASPM disabled re0: version:1.98.00 re0: Ethernet address: 00:0d:b9:38:30:10 Steve

Nice, I expected closer to 3GB so that doesn't seem unreasonable.

No only pfSense Plus is available in AWS.