Hmm, if you add a new drive the BIOS may add a UEFI entry for it and try to boot that if if sees it as bootable. If that does happen, on the 6100, you would need to set the boot device back to the old drive on the first boot at least. Just for anyone searching in the future.

You can only use the tokens once. If you moved the config to a new VM it will have a new NDI which won't be registered. Open a ticket with us. https://www.netgate.com/tac-support-request

@stephenw10 Just wanted to follow up and mark this one as SOLVED — removing the <phase1>1</phase1> from <ipsec> fixed the PHP errors and allowed the interfaces to load. I’ve got it back in production and have a bit more work to restore to the original config, but your advice definitely made the difference! Thanks so much for the help.

ahhh my bad i meant plus-didnt mean to be lazy but with all the previous hoopla over the modest charge for a great piece of software I wanted to make sure that I wouldnt incur the wife approval factor paperwork again LOL

sorry to necro this but its the top google search for the topic - do you have any insight into performance difference between KVM vs LXC QEMU? it would be nice to get a definitive answer on which is better

Yes I've hit that myself a few times and it can be confusing! There is work on-going to improve how that is handled.

@kj32 My experience with TAC is that you get a response within minutes any time of the day or night. Ted

@techmattr said in Recover config from mirrored zfs disk?: I rebooted my pfsense today and when it booted back up it threw an error that it could not find /boot/kernal/kernal or something to that effect. I eneded up having to reinstall My install was on 2 mirrored zfs disks. When I did the reinstall I only installed onto 1 disk. Is there any way for me to recover my config from the 2nd disk? Open a terminal or console and identify the ZFS pool name. You can use the following command to list the available ZFS pools: zpool list Once the pool is imported, you need to mount the ZFS filesystem containing the pfSense configuration. The exact path may vary, but it's typically something like /mnt/<pool_name>. zfs mount <pool_name>/mountpoint

@stephenw10 I have it set up for LAN. And I've seen the error message that I used to get, but the system keeps running after that now. I didn't use WAN because after reading what it says I thought that might be a bad idea.

@SteveITS Thanks for the tips. In the end, just restoring the pre-upgrade backup was the solution, the other things may have worked, but I needed to get fired back up and running so people could get back to work. J.

@stephenw10 apologies didn't see update on this. No I am unsure if bios was modified. So I bought this as part of a set from reseller on Ebay. its a checkpoint t80? when i got it it already had pfsense install restored so it was just configuring and completing the install. Current update is getting a new SSD to swap and see if that will correct my issue. New ssd should be here this week. Next steps is new bare metal server running pfsesne or promox with pfsesne. Apologies again for the delay and thanks for the assist.

@stephenw10 Thank you for this information. After setting my bios to legacy mode and reinstalling I did not get this error even after reloading all my previous config.

Indeed, i did try to install it also from a generic SD card reader that can read all kinds of memory cards. But as already stated this was not an option because i only had a 1GB Compact Flash card. After that i continued to install it via the USB memory stick image with serial output.. I'm still wondering why the memstick image with serial did not work and the one with VGA did. I did not try to do the ultimate test to install the memstick image with VGA console directly on the XTM510 simply because this is my production gateway to the internet. When my testbench of my homelab is up and running again, i can do some more tests and let you know. Thanks!

I can confirm that should not happen. The only way it could is if a custom script has been added to do so. There are some examples here on the forum but we do not recommend that.

Got worried after 5 mins but read this post and waited. 7 mins good to go

@aodisho The old Load balancer was removed some versions back. Yes, you have to use HAproxy for this goal now. You can find it in the Services menu after installation.

Yes send it in chat and I can check it.

@Popolou yes, there was no re-install packages option as no packages installed during new sw installation. Being connected to Internet was also key. I thought packages were installed from install.