pfsense is crashing need help
-
If the actual crash is different every time that does start to look like hardware. Is it actually returning a different backtrace?
-
If this is an unofficial Netgate SSD, I would suggest you replace that before a reload. It has issues pointing to files. Or memory, but the system bios runs. . .
Replace the SSD and reload it.
-
hardware failure It means to reinstall
Because pfsense is installed on one ssd disk
If I remove it I have no option to reload itWhen checking the bios I get a message that the disk is good
I checked the disc
the memoriesI will try to replace the memories before I replace the SSD
Otherwise it's reinstall everything -
@firefox We had some issues with Cisco routers doing this a couple years ago during the holidays. Cisco had information on a set of products that had defective RAM causing the memory pointer error. We must have replaced hundreds of memory sticks after that preemptively. This looks exactly like that. Good catch. Let us know how it turns out with the new memory sticks. You're right on with isolationing the issue.
-
@JonathanLee
the pc is from hp
it has some random ssd i got from another pc i had (it was working fine for almost Five years maybe a little more)
i will check about the memory sticksI'll deal with it on Friday
Then I will update -
@firefox
What file system is pfsense installed on? -
@w0w
Do you mean the format of the disk?In any case, a small update, I only got to mess with it today
I replaced the computer's memories
There were 4 sticks of 4 gigabytes, that is 16 gigabytes
I removed them and put 2 new ones of 4 GB
Meanwhile the computer is workingI surf through another router
If by the end of the day it doesn't cause problems I will add 2 more new 4 gig sticks
Then wait to see what happens -
@firefox said in pfsense is crashing need help:
Do you mean the format of the disk?
https://docs.netgate.com/pfsense/en/latest/install/install-zfs.html
I mean when you have installed it which one filesystem you have been selected? ZFS or UFS? -
@w0w
When I installed I did an automatic installation without any additional settings -
@firefox
That's fine. You can find it on the dashboard. Disks widget. -
@w0w
it says ufs -
@firefox you need ZFS it's a nice improvement
-
@JonathanLee
what is the improvement ? -
@firefox 1. boot environments, also less issues with cold boot resets. More stable filesystem.
