NG 1100 23.05 to 23.09 upgrade problem/question

stephenw10

At the command line run: pkg-static info -x pfSense
See which pkgs are still running 23.05.1.

In most cases you should be able to just run: pkg-static upgrade and agree to the available upgrades. But be sure to have a backup of your config in case you have to install 23.09 clean.

Steve

Cabledude

@stephenw10 I have the same issue after upgrading from 23.05 (not .1) to 23.09. The update process looked normal and it ended with success.

Dash says this:

23.05-RELEASE (arm64)
built on Mon May 22 15:04:36 UTC 2023
FreeBSD 14.0-CURRENT

Version 23.09 is available.
Version information updated at Sat Dec 2 23:59:29 CET 2023

When I check your query at the command prompt I get this:

pfSense-23.05
pfSense-Status_Monitoring-php82-1.8_3
pfSense-base-23.09
pfSense-boot-23.09
pfSense-default-config-serial-23.05
pfSense-kernel-pfSense-23.09
pfSense-pkg-Avahi-2.2_4
pfSense-pkg-Service_Watchdog-1.8.7_1
pfSense-pkg-aws-wizard-0.10
pfSense-pkg-ipsec-profile-wizard-1.1_1
pfSense-pkg-openvpn-client-export-1.9_1
pfSense-pkg-pfBlockerNG-devel-3.2.0_6
pfSense-repo-23.05
pfSense-repoc-20230912
pfSense-u-boot-1100-20220428
pfSense-u-boot-2100-20210930_1
pfSense-u-boot-env-20230123
pfSense-upgrade-1.2.1
php82-pfSense-module-0.95

Please advise.

stephenw10

Ok so we have seen that a few times and most people who hit that were able to complete the upgrade by running pkg-static upgrade and then agreeing to the offered upgrades. Do that at the real command line not via the gui command prompt. Be sure to have a backup of the config though in case you need to reinstall.

Cabledude

@stephenw10 Thank you. When you say "the real command line" do you mean connecting to the device via the console port (USB cable)?

SteveITS

@Cabledude said in NG 1100 23.05 to 23.09 upgrade problem/question:

@stephenw10 Thank you. When you say "the real command line" do you mean connecting to the device via the console port (USB cable)?

Or SSH. If using Diagnostics/Command Line one can't respond to prompts so the process hangs.

Cabledude

@SteveITS said

Or SSH. If using Diagnostics/Command Line one can't respond to prompts so the process hangs.

Ah okay. So I could in fact do it over VPN using SSH? It's a remote site that takes an hour to drive.

stephenw10

Yes, you can but you should have a fall back solution if it fails to upgrade for some reason.

Cabledude

@stephenw10 I hear you and thanks for the warning. Well I suppose the unit will just chug along as is until I get on site again so I’ll just wait.
What does look fascinating is that some components (base, boot, kernel) appear to be on 23.09 while the system itself is on 23.05.

stephenw10

Yes exactly it has partially upgraded. Those components are updated before the first reboot at upgrade. It then boots into the new kernel and updates all the other packages. In this case it failed to complete the second part of that for some reason. It may be logged in /conf/upgrade_log.latest.txt
Usually just kicking the pkg upgrade again completes it.

Cabledude

@stephenw10 Thanks for that.

Side note:
I just updated my SG-2100 main production unit to 23.09.1. See this topic where I report high RAM usage after the update.
If the 23.09.x is indeed RAM hungry, how is it even possible to run 23.09.x on the SG-1100 with 1GB RAM?

Edit: nevermind. On my 2100 it got back to 16% after a second reboot.

stephenw10

Yup it uses significant memory to run the upgrade. That will be freed eventually or if needed but as you found a reboot after upgrade will also free it.

Steve