@yobyot said in Do you have performance tips for Proxmox virtualized pfSense?: Actually, no. pfSense was running on an external Vault. When I migrated it to Proxmox, I put it on vmbr1. I haven't found a way to renumber the bridges so that it "looks" right and now I kinda like it. Well, if it works for you, hooray...I just shared what the pfSense document says...like I installed using UEFI for pfSense on Proxmox, as well as, install Proxmox on ZFS.

I waited for 2.7.0 but the issue remains there. That's very, very bad. Seems to be an issue with underlying FreeBSD as this is recognized there too, also in OPNSense. Irritating is for me the fact that there are different amounts of LAN interfaces causing this issue. Clean booting a newer pfSense image hits the same issue...

@NollipfSense Thanks for the reply. Ifconfig doesn't have a setting for FEC, but fortunately I found the solution by using the intel driver specifically for the E823-L which offers a wide range of tunable parameters. Unfortunately that driver doesn't compile correctly using the the latest FreeBSD 14.0 CURRENT release and the RELEASE version has been delayed. So it looks like I'm stuck on pfSense 2.6 until I can compile a driver for the latest update.

@Patch said in Some packages fail to start after issuing "reboot VM" command on Proxmox: Try it. When watching the process on the Proxmox console for pfsense it proceeds cleanly. I actually did, a boot up though using Proxmox...just can't see myself doing a shutdown.

@viragomann I didnt change anything, its set to VMX3, not e1000

@jacky said in Proxmox hosted pfSense Netgate Device ID changes on reboot: The changes on the MAC address on this USB NIC is the cause of the changes of the NDI. Interesting, indeed; that will do it....

@digdug3 Thank you, your suggestion still works. link text

@andrew_241 I thought you would be using esxi or something. I like Hyper-V better as it's native in Windows and works really good now.

Unfortunately I have zero control over the hypervisor… I’ll ask the hoster

@provels Thanks I'll give that a try. I think what im going to do first is make a new backup of the physical box tested with that isnt using PFSense Plus and try to restore that config to the VM first to see what happens. If that doesn't work I'll do as you suggested.

@NollipfSense that's why it works correctly, it disables it automatically (although it's always good to disable it ALSO manually) Thank you very much

@Richard-1 said in No DHCP on proxmox: On my Win11 VM I receive ip configuration from DHCP server, on my physical PC no DHCP configuration received, I need to enter ip, subnetmask, gateway, ... manually to connect to network. It's the way you have it setup...please see here: https://docs.netgate.com/pfsense/en/latest/recipes/virtualize-proxmox-ve.html Did you connect your physical PC to pfSense LAN? Nothing is wrong to connect manually though. You should consider amending your title as Proxmox doesn't do DHCP.

@nasheayahu pfSense is a GUI based router firewall. So, use the GUI ( ). [image: 1686895127833-575ffff5-d821-49ed-83a0-db734ea93c72-image.png] All, this means every config file, like /etc/hosts, are created upon boot or system GUI config only. You should not modify them manually. The entire system config is read from /cf/conf/config.xml upon boot. Go have a look.

Solved - https://forum.netgate.com/post/1110576

@Papa_Dragon said in Proxmox Web Interface Not Accessible When Shaw Modem is in Bridge Mode: i had to Set your computer's IP address to be within the same network range as the Proxmox server. I told you repeatedly, even drew an ugly looking diagram because I didn't want to spend valuable time with a network fancy diagram...wow! Glad you finally got it.