This needs to be added as a sticky or FAQ. I haven't read this anywhere else and it must be plaguing plenty of users. I don't actually have any Win7 machines myself.

Steve

I have seen similar wierd things before. If you are sure your config is correct, try asking the user to connect via a different firewall (at their side), for example if it is a lap top, ask the user to connect via a smart phone, the WLAN service in the cafeteria or the local Internet café or similar. If it works I would suspect that the firewall does something that your firewall(s) does not like, such as silently dropping some tcp packets or similar that results in the client (software) not beeing able to connect. Could be a bad port in a switch or a "broken" switch as well but not as likely. Try replacing one thing at a time and you'll probably find what causes this. If it does not work, try using a dirrefent client software or similar service such as VNC etc at the client side (temporarily disabling software firewalls could be worth trying as well).

If all other clients can connect it should be something this client does differently and the explanation is probably hidden in there somewhare.

If you find what causes the problem, please write it here for future referenses.

cheers,
/e

Are those gateways routing only? If they are NATting, then it will not be possible. But under a routing, you can allow that IP to allow all or to white list it in squid. When you white list, I don't think it caches. Is that what you are looking for?

What is the application?  Only time I have heard of forwarding to broadcast is with a WOL type setup where you want to send a magic packet across a NAT.

Has anyone else had any luck with the USB551L and pfSense?

Nobody ? no ideea wwhy the rrd Graphs are not working?

It means what it says: It was able to bind, but not able to retrieve OU's. Perhaps the account you gave it to bind with doesn't have enough privileges to do what it's attempting?

If the AD server auth fails it should fail back to the local auth DB, but it's best to switch back if you get an error just to be sure.

Yep working now - added a screenshot fine.

hi,
I don't test it because i need some time.

I tell you when i've done.

Thanks.
Myke.

Hi, Best regards

I try to understand your code,

in this lines

foreach ($ifdescrs as $ifdescr => $ifname):
        $ifinfo = get_interface_info($ifdescr);

i think that maybe you have one error, because you don't use the real value ( $ifname), you use, the  key ($ifdescr)
…
        foreach ($ifdescrs as $ifdescr => $ifname):
        $ifinfo = get_interface_info($ifname);
...

Is there a special way to get an account in the bugs system?  Logging in with my account here didn't work, so I tried to register for a separate account there but didn't get any response.

Are you running a bunch of packages, have you customized something?
A backup and restore of the config is usually the best way to do this, and it fits on a usb key.
I like to have spare pfsense boxes around with enough interfaces, so I can grab one, restore the config and swap it in case of disaster. Much easier (IMHO) than trying to restore an image. Again the circumstances might be different if you had to re-create some customization/hacking, or had complex packages installed.

Thanks a lot… Ntop is what i was looking for...

cheers!

Pedreter!