The users will be connecting to the network via WiFi emitted by AirLive. The devices that connect to the network are either mobile devices (cellphones, tablets, ipods, laptops, etc.) through captive portal. The VIPS and employees will have a username and password while guests use vouchers. Is it possible to set the bandwidth by user? VIPs should have high bandwidth priority. Other possible relevant details:     The pfsense server has 4 network adapters one for WAN and three for LAN.

Hi, same error here. Tested with rc_debug=YES but without success. After a reboot it works. HTH Francesco

Well,  for the heck of it (not sure why I didn't do this prior to my post) I white boarded the NTP flow and realized a fundamental point; the backup won't receive the reply through CARP. I added an OUTBOUND NAT rule to focus NTP traffic to go out through the WAN ADDRESS.  After a restart of the service, it appears to be working correctly.

Sounds like you're doing it right by adding an IP alias type VIP. After you do that, run a constant ping to that VIP. Packet capture on WAN filtered on that IP, and see if it's getting to you. That'll confirm whether or not the VIP is working.

Hi, Sorry for waking this topic up.  But i'm in the same situation now and trying to get this working. Did you ever find a solution?

Hello! I did search in forum how to organise simmilar things to what i require.Could somebody provide me link? Thank you!

Thanks cmb, I'll try the latter option.

I read this before but is a problem with 2.3.x https://redmine.pfsense.org/issues/6099#change-27787 an IGMP v3. If you want test something you should use the 2.2.6 even if this look like not affect you is suppose to affect vlan configs only. The number of time i try put some IPTV working i fail at least with the 2.3.x.

Just tested, the issue/bug still exists even though Unbound didn't listen on the WAN interface.

Writing paper models, tips , and information provide this service.click here. Your link is for a commercial service unrelated to pfSense, that type of advertising on the forums is not allowed and will get you banned.

Btw. since I'm really new to pfSense I do welcome any input and improvements in regards to my rules and configurations.

if its going through pfsense it sure is not broadcasting or multicasting, unicasting sure.. You do understand broadcast layer 2.. You can do some stuff with multicasting if you have smart switches and pfsense has igmp proxy, if your wanting to multcast to install images onto machines I would suggest the box that is pushing the images to your machines should be in the same layer 2 as getting the image since seems you don't even have smart switches that can do anything with multicast?

I think I'll stick with just these two features: Block RFC1918 Private Networks Block bogon networks

up

@BlueKobold: What else can I try? This is new pfsense box… See above. What kind of connection method you were setting up at the pfSense box? DHCP, static public IP address or something else? Is the Arris a pure modem or a router? After rebooting the pfSense was the given MAC address from you also inside or gone? Perhaps you might be needing the new MAC Adress from the new Arris modem? Please help! I am pulling my hair out! Don´t do so this only looks good for Bruce Willis! Thank you all for the help. I had Charter switch out the cable modem from the Arris to a cisco modem. Fired up the cisco and it worked instantly …. even without having to change the mac address. It seems like on another forum I had read where some of the newer cable modems don't work with pfsense.  Thought I would share for someone else who might have the same issue. Here is another person who had the same issue as me on the pfsense forums..... https://forum.pfsense.org/index.php?action=profile;area=showposts;u=287475 Again... thanks for all the help!!! :D

Yep, That was it. Thanks!

Thank you.