Open a ticket with us: https://www.netgate.com/tac-support-request

There isn't yet an automated way to do that.

Steve

@stephenw10 said in historical log for WAN latency and performance:

Have you tried using Easy Editor? It's about as easy as it gets for editing a txt file.

Nano are much better!

In combination with zsh+ohmyzsh (+ Fish-like color code highlighting, code suggestions and multi-word search) - are perfect toolset. (7min step-by-step instruction how to quickly installing zsh, ohmyzsh + zsh-highlighting You may see here).
Strongly recommend to try!
If a You spend such amount of time in CLI, zsh make a You happy.

Like ping comparing with Smokeping ;)

@stephenw10 said in [WORKAROUND] Unable to update and package install (ERROR: It was not possible to identify which pfSense kernel is installed):

This?

SSH KeyGen pfSense has started creating missing SSH keys. SSH Startup will be delayed. Please note that reloading the filter rules and changes will be delayed until this operation is completed. @ 2022-05-01 12:55:10

That's normal whenever new keys are created. Which until 22.01/2.6 was every install or config reset.

Steve

Thank You, Steve!

this fixed it seems to be working fine now. no problems so far.

@fireodo said in router randomly freezes:

@elliopitas
Hi,
maybe thats a Realtek driver problem. Read this:
https://forum.netgate.com/topic/166746/realtek-re-kmod-missing-in-pfsense-2-6-repository
Could be a possible solution ...

@jonthemusse said in Filtering out multiple colums in DHCP leases:

Hi,

I'd like to figure out regexp on dhcp leases to filter several columns. Like online and static for starters.

Basic regexp doesn't seem to work. I suck at it though.

Jon

Try:-

https://regex101.com/

Are you sure hyper-v is passing the tagged traffic? Can you test running baremetal on something?

Steve

When you set outbound NAT mode to manual all the auto-added rules are created as manual rules to start with so you still have connectivity.
When you go to Hybrid mode those manual rules are not removed but the auto rules are also applied. You will see most are duplicated. You can remove all the manual rules except the VoIP rule you added as the auto rules now cover that.

Steve

I just found this being discussed here

fe80 are link-local addresses. I wouldn't expect to see host names against them.

Do you see host names in the dhcpv6 leases table?

Steve

Thanks to Netgate support.

To close this loop, it was this bug:
https://redmine.pfsense.org/issues/11626

For now, an stunnel is required.

It should be fixed in 22.09.

Thanks again!

@stephenw10

I have dropped out of many groups because members reply with a redirection in effort instead of working a problem. One fellow asked why I wasn't using a VPN to access my web content. I explained that the purpose of the website was for public use, not private. Or one fellow suggested I change from ESXi to ProxMox... Naw... too complicated for my purposes, and it means starting over from ground up.

I have enjoyed pfSense and need to be sure I've got it set up to give me maximum protection. One fella said Port Forwarding was risky as it opens you up to hackers. Well yeah, I knew the apps would be at risk. That's why I use ESXi, and backup my VM's. Get hacked... dump and replace...

My next job is to configure the email blocking that is provided under "feeds".

Thank you Steve

Really you need two interfaces to do this. Assuming your laptop only has one NIC that generally means you need to use VLANs and a managed switch to create a WAN and LAN interface.

Then you should connect the pfSense WAN to the ADSL router and all the clients to the LAN.
If the ADSL router can be put into a bridge mode so it passes the public IP to pfSense directly that would be better.

Steve

@stephenw10 Yes it seems to be showing this morning. Of course it was the day I needed to restore from backup.

Thanks

@stephenw10 said in Automatic Config Backup (ACB) not working/missing backups:

It's an issue at our end in the server. Our team are working on it.

Backups should be available currently though if you have not yet restored.

Steve

Ok, thanks for the reply!
I'll have some patience than. ;-)

[update]
Indeed they are available now! Thanks

Well, that worked, thanks so much. Feels a bit better seeing it upgrade and upgraded.

No idea how I'm going to test the proxy as I've decided to do something different. Have not gone back to it since finding the problem.

Thanks all.
I'll let Negate handle it.

@johnpoz Default lease is 7200s/2 hrs.

Also, "Ping check" is enabled by default to try to see if an address is in use before assigning a conflict.