Probably a difference in the BIOS and how it expects to boot (MBR vs GPT, or BIOS vs UEFI). In most cases you can move a drive around, but at that point it mostly depends on the BIOS settings vs the disk boot layout/partitions.

Cool, thanks for confirming.

Having the same trouble. After upgrading, the second re1 stopped working as soon as bsd loaded. I tried re-installing, but formatting re-installing didn't help because pfsense downloaded the latest version which disabled the second nic, again!. ifup re1 didn't work. I could see that I had a physical link, until bsd loaded and before the firewall software loaded up. The problem appears to be BSD and not pfsense. I can't install packages because 2.4.3 is looking for an upgrade and, frankly, I really don't want suffer the same trouble on a production system. Any help here would be appreciated. Not the way I wanted to spend my saturday afternoon. I ended up installing on a completely different system. Thanks

@Bulldogg said in Bios update: Apr 5 2014 That must be what we were selling as an APU4 right? Which is actually an APU1 with 4GB RAM. You will need to APU1 rom file if so. There is no real reason to update Coreboot on that I'm ware of though. See: https://forum.netgate.com/post/777287 Steve

Hallelujah - its finally working and sorted - follow the OVH links for a server on OVH. I wish i had looked at the articles rather than following a youtube video where i shouldn't have configured pfSense by adding static routes etc. Plus the gateway was set incorrectly. Kom and Awebster - really appreciate your help.

@Gertjan thank you very much sir after I run the fsck -y command the reboot loop stop and it back to its normal operation. I hope i could not see crash report again..

Probably this: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=215471 Try removing the virtual cd drive. Steve

On install of OS you have options to recover config.xml from previous install before format drive. FYI: now you can auto backup config for free out of box to netgate servers in encrypted way. Or if you have paranoid you can use curl script to download backups on another unix-based machine internally.

I completed the install with pfSense-CE-memstick-2.4.4-RELEASE-p3-amd64.img I put the Allied Telesis 2711FX back in and it goes back into a panic. Seems others have run into no support for this card in freebsd. http://freebsd.1045724.x6.nabble.com/12-STABLE-CURRENT-Dell-PowerEdge-2950-Allied-Telesis-AT-2711FX-SC-100MBit-fibre-NIC-not-recognized-td6328982.html

@NogBadTheBad said in random sources feed: rs_read for hardware device 'intel secure' key ring" returned no entropy: Anything in the BIOS that can be switched off for the Intel secure key ring / random number generator ? https://software.intel.com/en-us/blogs/2012/05/14/what-is-intelr-secure-key-technology You may be better looking in the FreeBSD forums, I'm not sure if pfSense even uses the Intel RNG maybe @jimp or someone else from @netgate

@biggsy said in odd issue with ram?: @bmeeks Thanks for the link. I think I get what it's all about. Just found it strange that both topics seemed to be about memory shortage under two different hypervisors. I found precious little information about that specific error. In fact, practically nothing. I did see SRAT issues mentioned for ESXi and Hyper-V, though. It might take looking into some hypervisor source code to see what the error really means. Hopefully such code is commented enough that you could discern what might be up.

I connected hdd to another motherboard and the system booted. I made the setting and returned hdd to q1900m. Now I go through web interface

Just a heads up we moved the LAGG to an Intel X550-T2 and this appears to have removed (dodged) the issue

there are 3 LED related functions in the Check Point kernel ... janus_pld_red_led_set (Bit 0x01) janus_pld_yellow_led_set (Bit 0x02) janus_pld_green_led_set (Bit 0x08) they write to port 0x348 ... this seems to be the Altera MAX II chip (PLD) next to the diag display btw: the PLD also monitors powersupply status ... and there are 4 LED related functions for 'Phalanx PLD' ... phalanx_pld_red_led_set phalanx_pld_yellow_led_set phalanx_pld_green_led_set phalanx_pld_disk_led_set ***** this might be the explanation for the 'missing' led on the frontpanel PCB (Bit 0x04 is assume) hope this helps - sorry for the late reply ;) /paketix

@cinlung said in Connecting PON Modem to PFSense has very high latency: FO PON modem directly conect a pc on port 1 of your pon modem a do a test, more likely is a ISP problem

@Renat hello sir thanks for this thread it help me a lot. I have to observed this machine if error still exists. Thumbs up! ;) AMD A6-6400K APU with Radeon(tm) HD Graphics 2 CPUs: 1 package(s) x 2 core(s) AES-NI CPU Crypto: Yes (inactive) I have 1 NIC card attached on my machine. Winyao E350T4 PCI-E X1 Quad Port 10/100/1000Mbps Gigabit Ethernet Network Card Server Adapter LAN I350-T4 NIC This is the specs the NIC card having 4 ports. I hope that the error be fixed. ;)

@Erly-Araújo it was on older version of pfsense https://www.netgate.com/blog/pfsense-2-4-1-release-now-available.html

"Truncated ELF file" => standard OS commands are unreadable. Leave the disk as is. Salvage config.xml Reboot using a install device and install from scratch. When you are asked to format the destination drive, do no go for quick one, but chose the non-default total format with check (I didn't re install pfSense on a physical disk, mine just wont die after nearly 10 years ...)

https://forum.netgate.com/topic/146189/crash-report-after-update