Just for the record; The Netgate support team had replied to my message before I had even managed to log on to see the ticket, super super fast response. Downloaded the image, wrote to USB, re-installed and all seems to be good with the world. Thanks guys and girls.

@stephenw10 I think I'm affected by this bug, at least I can't get my MBT-4220 to boot anymore since attempting to upgrade to pfSense 2.6.0 The issue is, booting from a USB stick, and mounting the zfs partition on the regular boot drive, I can't find a /boot/loader.conf.local file, just a /boot/loader.conf So how do I disable the console driver from getting loaded? By removing/renaming the /boot/kernel/i915kms.ko file?

Nice catch!

@steveits said in firmware for 3100: https://www.netgate.com/tac-support-request already submitted a ticked and then it said to make an account. i redid the support ticket creation becouse i think i did not select the firmware access :) hope they get back to me soon

Thank you for the quick reply Steve, the upgrade to 22.01 went smooth. -Rico

@valien @valien If your setup is different from other´s testing environment you may get out also often other number. LAN: iperf server on linux server iperf sender on linux server dump GB switch pfSense is touring between them = raw routing throughput (LAN) The same set up with two Windows machines and copying many smaller some mid and one great cumulated all number you will be getting out something that is called "IMIX traffic" this is than more near the real world, traffic or situation you hit with your numbers or will be meeting. So if you are not complete clear about have a look on the IMIX traffic in your tech specs and all is fine, I mean you are more close to real world usage specs. IMIX: is maxing out at ~250 MBit/s so if you get 540 MBit/s you have some free space ahead for setting up rules installing packets and more.... WAN: Can be more different in all our (customers) use cases, So if they test to show us up numbers it can be more differeing from our home or worksplace netflow. Being fair Netgate 2100 for something like 100/50, 100/100 or to 200/200 MBit/s internet with low power consuming will be a rocket with some space to install packets.

@pfgateuser said in SG-3100 - Reboot loop - ufs_dirbad - 21.05.2: At what point in the startup process should I have been able to get to single user mode, and how? Here: __ __ _ _ | \/ | __ _ _ ____ _____| | | | |\/| |/ _` | '__\ \ / / _ \ | | | | | | (_| | | \ V / __/ | | |_| |_|\__,_|_| \_/ \___|_|_| _ _ ____ _ | | | | | __ ) ___ ___ | |_ | | | |___| _ \ / _ \ / _ \| __| | |_| |___| |_) | (_) | (_) | |_ \___/ |____/ \___/ \___/ \__| ** LOADER ** U-Boot 2013.01-02861-g15adf50-dirty (Jul 18 2017 - 23:19:03) Marvell version: devel-17.1.1 Board: Rogue-1 SoC: MV88F6828 Rev A0 running 2 CPUs CPU: ARM Cortex A9 MPCore (Rev 1) LE CPU 0 CPU @ 1600 [MHz] L2 @ 800 [MHz] TClock @ 250 [MHz] DDR4 @ 800 [MHz] DDR4 32 Bit Width,FastPath Memory Access, DLB Enabled, ECC Disabled DRAM: 2 GiB MMC: mv_sdh: 0 DBG: Calling spi_flash_probe from env_relocate_spec() SF: Probing bus 0 cs 0 @ 20000000Hz mode 3 SF: Detected N25Q128 with page size 64 KiB, total 16 MiB PCI-e 0 (IF 0 - bus 1) Root Complex Interface, Detected Link X1, GEN 1.1 PCI-e 1 (IF 1 - bus 2) Root Complex Interface, Detected Link X1, GEN 1.1 USB2.0 0: Host Mode USB3.0 1: Host Mode Map: Code: 0x7fedc000:0x7ff97568 BSS: 0x7ffef600 Stack: 0x7f4cbf20 Heap: 0x7f4cc000:0x7fedc000 U-Boot Environment: 0x00100000:0x00110000 (SPI) Board configuration detected: Net: | port | Interface | PHY address | |--------|-----------|--------------| | egiga0 | RGMII | 0x00 | | egiga1 | RGMII | 0x01 | | egiga2 | SGMII | In-Band | egiga0 [PRIME], egiga1, egiga2 Hit any key to stop autoboot: 0 Reset SCSI AHCI init for unit0 Target spinup took 0 ms. SATA link 1 timeout. Error: SCSI Controller(s) 1B4B:9215 1B4B:9235 not found scanning bus for devices... Device 0: (0:0) Vendor: ATA Prod.: NT-32 Rev: 1.09 Type: Hard Disk Capacity: 30533.8 MB = 29.8 GB (62533296 x 512) Found 1 device(s). reading ubldr.bin 228648 bytes read in 10 ms (21.8 MiB/s) ## Starting application at 0x00200000 ... Consoles: U-Boot console Compatible U-Boot API signature found @0x7f4dc280 FreeBSD/armv6 U-Boot loader, Revision 1.2 (Tue Jul 10 10:26:23 EDT 2018 root@buildbot3) DRAM: 2048MB Number of U-Boot devices: 4 U-Boot env: loaderdev not set, will probe all devices. Found U-Boot device: disk Probing all disk devices... Checking unit=0 slice=<auto> partition=<auto>...disk0: read failed, error=1 Checking unit=1 slice=<auto> partition=<auto>... good. Booting from disk1s2a: Loading /boot/defaults/loader.conf console comconsole is invalid! no valid consoles! Available consoles: uboot /boot/kernel/kernel text=0xa9a600 data=0x11d4be8 data=0x0+0x54000 syms=[0x4+0xa9240+0x4+0xf4222] \ Hit [Enter] to boot immediately, or any other key for command prompt. Type '?' for a list of commands, 'help' for more detailed help. loader> boot -s

@stephenw10 Roger that... I am thinking of getting an intel based CPU unit for the pfsense+ 22.01.. I've had nothing but issues with this unit. I may not be 100% geek level on pfsense+ but this should have been simple and follow proper methodologies. Thank you Steve!!!!

@lamaz said in SG-5100 -- Verify that M.2 SSD is recognized after physically installing.: https://forum.netgate.com/topic/168299/sg-5100-disable-onboard-emmc/2 The poster never responded on that thread. So same question here. Does the eMMC device still appear in the SDIO config menu? Steve

Yup, that. Open a ticket and we can convert that for you. Steve

The 10G PHYs can use a Watt or two with SFP+ modules in. The one I have here is using ~15W on the same meter but it's 'fully loaded'. Yes, it's very similar to the 6100 so most of the issues had already been solved. The sort of things we saw in development were due to the differences, like the omission of the first two ix NICs from the SoC. Steve

Not right now, as far as I know. Check the Partner Locator to find the nearest vendor: https://www.netgate.com/partner-locator#middle-east Steve

Nice video , but I guess this is only an advise how to proceed after the power cycle!? Because appliance was unresponsive there was no chance to run a file system check in advance. Finally done the fsck, looking forward, if such behaviour will reoccur in future. Regards

@stephenw10 & @mer, It is just nice to not have a red flashing light in the meantime. Annoying as flan. Phizix

@tokyobb said in 6100 with Japanese ISP - NURO: I could pull the ONU out of the Huawei and use that It's a GPON SFP+ module? If it doesn't even link it may not be possible. Are you able to try it in anything else? A media converter perhaps? Beyond that I'd be looking a local user groups who might have tried something similar with other firewalls. Steve

@stephenw10 thanks so much! I upgraded from 2.4.5 to 21.05.2 successfully, then upgraded to 22.01 successfully. Next week I'll try out the Snort package, but will keep an eye on the CPU/memory usage after doing so. If it seems to push it too much I'll remove it. Wish I would've purchased a 2100 now. Regardless, thank you for your help and your heads up on the Snort package. Jamie

The ports on the 6100 are only labeled WAN/LAN you can use any port for any purpose. That is, you can use the 2.5G ports for WANs or LANs. It's got 4x 2.5G ports, 2x 10G SFP, and 2x 1G combo ports. So the only thing it doesn't have on your specs is one additional 10G SFP port.

Sounds like it's probably a bad port then. Not much can be done if it's not obviously damaged. Steve

@steveits said in New Netgate Appliance for IPS/IDS: @mcury And what does the mmc program tell you for the life? You mean mmc-utils package - pkg install mmc-utils ? I'll check then update the other topic Might be best to reply in that other thread as I feel we're digressing a bit off this one...? I don't want to hijack the original question. You are right... Won't polute this anymore :)

Ah, Ok thanks for the update. I couldn't replicate it here.