Subcategories

  • Discussions about packages which handle caching and proxy functions such as squid, lightsquid, squidGuard, etc.

    4k Topics
    21k Posts
    N

    Can I use pgblockerng aliases in Haproxy?

    80758505-9bad-4dad-a80b-c159be1045a2-image.png

    If it was a firewall rule, typing pfb would produce a dropdown to select.

    Here it has to be written, but will it work? Is it supported?

  • Discussions about packages whose functions are Intrusion Detection and Intrusion Prevention such as snort, suricata, etc.

    2k Topics
    16k Posts
    cyb3rtr0nianC

    @bmeeks So after upgrading to the newest PfSense 2.8.0 everything is now working like a charm!

    Suricata no longer seems to strip off tags like it did before! Which means I can now use my network segmented by VLANs and still use the benefits of Suricata Inline IPS! Very niiize!

    I checked in the Alerts section and it is indeed generating the correct alerts from the different VLAN sections, I put Inline IPS on the parent interface of all the VLANs.

    I assume this is because the FreeBSD version is also updated with the new PfSense 2.8.0 version?

    Because before, as soon as I selected Inline IPS mode, my entire VLAN tagging would break and nothing was reachable until I switched back to Legacy mode.

  • Discussions about packages that handle bandwidth and network traffic monitoring functions such as bandwidtd, ntopng, etc.

    571 Topics
    3k Posts
    K

    @pulsartiger
    The database name is vnstat.db and its location is under /var/db/vnstat.
    With "Backup Files/Dir" we are able to do backup or also with a cron.

  • Discussions about the pfBlockerNG package

    3k Topics
    20k Posts
    reza3swR

    @Gertjan
    Hello,
    Thank you.
    I had exactly the same issue, and your solution helped me fix it.

    Ask ChatGPT

  • Discussions about Network UPS Tools and APCUPSD packages for pfSense

    101 Topics
    2k Posts
    J

    NUT version is 2.8.2_5 (I've already tried reinstalling the package)

    NUT seems to think it can't find the UPS, but usbconfig shows it to be present:

    [2.8.0-RELEASE][admin@janus.jhmg.pvt]/usr/local/etc/rc.d: usbconfig ... ugen0.5: <PR1500LCDRT2U UPS Cyber Power System, Inc.> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (2mA) ...

    Below is the console log attempting to start NUT from the command line.

    [2.8.0-RELEASE][admin@janus.jhmg.pvt]/usr/local/etc/rc.d: ./nut.sh stop stopping NUT [2.8.0-RELEASE][admin@janus.jhmg.pvt]/usr/local/etc/rc.d: ./nut.sh start starting NUT Network UPS Tools - UPS driver controller 2.8.2 Network UPS Tools upsd 2.8.2 fopen /var/db/nut/upsd.pid: No such file or directory Could not find PID file '/var/db/nut/upsd.pid' to see if previous upsd instance is already running! Network UPS Tools - Generic HID driver 0.53 (2.8.2) listening on 127.0.0.1 port 3493 USB communication driver (libusb 1.0) 0.47 listening on ::1 port 3493 Can't connect to UPS [CyberPower-1500] (usbhid-ups-CyberPower-1500): No such file or directory libusb1: Could not open any HID devices: no USB buses found No matching HID UPS found upsnotify: failed to notify about state 4: no notification tech defined, will not spam more about it Driver failed to start (exit status=1) Found 1 UPS defined in ups.conf Network UPS Tools upsmon 2.8.2 kill: No such process UPS: CyberPower-1500 (primary) (power value 1) Using power down flag file /etc/killpower

    Also

    [2.8.0-RELEASE][admin@janus.jhmg.pvt]/usr/local/etc/nut: more ups.conf [CyberPower-1500] driver=usbhid-ups port=auto [2.8.0-RELEASE][admin@janus.jhmg.pvt]/usr/local/etc/nut: egrep -v '^#' nut.conf MODE=none

    and this, which singles out the usbhid-ups driver as the problem:

    [2.8.0-RELEASE][admin@janus.jhmg.pvt]/usr/local/etc/nut: /usr/local/libexec/nut/usbhid-ups -a CyberPower-1500 Network UPS Tools - Generic HID driver 0.53 (2.8.2) USB communication driver (libusb 1.0) 0.47 libusb1: Could not open any HID devices: no USB buses found No matching HID UPS found upsnotify: failed to notify about state 4: no notification tech defined, will not spam more about it
  • Discussions about the ACME / Let’s Encrypt package for pfSense

    493 Topics
    3k Posts
    GertjanG

    @EChondo

    What's your pfSense version ?
    The instructions are shown here :

    1acdc586-cb29-4148-9e36-81ade4e5e60c-image.png

    A restart of a service will start by re creating their config files. If a certificate changed, it will get included. When the process starts, it will use the new certificate.

    @EChondo said in Issue with ACME Certificates Refresh & Restarting HAProxy:

    I haven't been able to confirm if the above works(mine just renewed, don't feel like doing it again just to test), so we'll see in 60 days I guess.

    No need to wait x days.
    You can re test / renew right away, as you are 'allowed' to renew a couple (5 max ?) of times per week.

  • Discussions about the FRR Dynamic Routing package on pfSense

    294 Topics
    1k Posts
    R

    I had a similar issue with Routed VTI over IPsec recently. FRR lost its neighbors after rebooting or when a tunnel went down. It never re-discovered it automatically. Only restarting FRR (either in GUI or via CLI) brought the neighbors back.

    When I manually added those under the OSPF neighbors tab in the GUI it seems to solve the problem as well.

  • Discussions about the Tailscale package

    89 Topics
    574 Posts
    A

    Hello,
    I am unable to get the Tailscale package to work. The page at VPN > Tailscale > Authentication is stuck. It displays the error "Tailscale is not online," but also shows a "Logout and Clean" button, with no option to log in.
    link text

    This state persists even after performing the following troubleshooting steps:

    Rebooting the pfSense router.

    Completely uninstalling and reinstalling the Tailscale package multiple times.

    Clearing browser cache and using a private browser window.

    Toggling the main "Enable Tailscale" checkbox in the settings.

    Checking the logs, which show the service gets a "terminate" signal and shuts down cleanly; it does not crash.

    Manually trying to delete the state file with rm /var/db/tailscale/tailscaled.state, which failed because the file does not exist.

    It appears that the package's configuration is corrupted in a way that persists even after reinstallation. Can anyone advise on how to perform a complete manual cleanup of all Tailscale files and settings?

  • Discussions about WireGuard

    690 Topics
    4k Posts
    J

    I've read through some other posts about this, but they either didn't say whether the proposed solution worked or they were very convoluted and difficult to understand. Here is our scenario: We have 6 locations--Las Cruces (LC), Sunland Park (SP), El Paso (EP), Abilene (ABI), Fort Worth (FW), and Plano (PL). LC and ABI have software that is accessed by the other 4 locations via VPN. There are WireGuard VPNs set up between LC and those 4 locations (SP, EP, FW, PL), and ABI and those 4 locations (SP, EP, FW, PL). There is also a WireGuard VPN connection between LC and ABI. LC and ABI have 2 internet connections. SP, EP, FW, and PL each have one internet connection.

    If the primary internet connection goes down at either LC or ABI and failover occurs to the secondary internet connection, is there a way to set up the WireGuard VPN connections so that they also failover without purchasing some 3rd party application?

    Thanks.

Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.