If enough people get together and pool money for a bounty, it can add up fast.

Or if someone with the skills to handle the feature comes along and wants to donate their time, that is always appreciated too.

Such is the nature of open source software.

Good to hear - I managed to find the fiber support number on their site a few weeks back and was pleasantly surprised to find it answered by a real person on the second ring.  The guy (Ramon) informed me that they take the info, open the trouble ticket, and work it themselves.  Nice to know that the techs are still answering the phones somewhere.

What are you paying for 5x5 and how long was your contract term?

hehehe

the problem got solved…
the problem was.. in the cable between the antenna and WiFi NIC in pfsense.....  ;D
so, everything runs now ;)

Windows XP Prof SP32…

Another approach, still using GPIO, and possibly easier to do, would be to still hook a push button to the gpio, but, this time, while the board is lit..
If the button is pressed, trigger the slice selection routine, than reboot the box
But i really feel it'll be better if done before the board is turned on ..

Well the third option would be to get access to the phoneline distributor panel.
Patch one of the 4 lines from her to your home, have at your home an DSLAM and let her access you.
But since i doubt that you have:
A: Access to the distributor panel
B: A schema of the distributor panel (good luck finding the right wires)
C: An Access Multiplexer lying around
It's really easier to just go the "official" way.

(We had to go with this option for a setup in our town, but that included a lot of paperwork with the telephone company and quite expensive hardware)

Not in pfSense 1.2.3

I believe it is already on PHP 5 for pfSense 2.0, however.

@sullrich:

Looks like Chris got you squared away?

YES!! I am going to start with the 5 hour pack! I am on my to pfsense heaven!!

Be aware that D-Star is almost exclusively used for Amateur Radio.  Anyone planning to use the Icom ID-1 (at least in the US) will need an Amateur Radio license and no commercial and/or encrypted traffic of any form can be transmitted on the amateur radio frequencies.

Icom does offer the IDAS system which is designed for business use and provides much of the same functionality.

Mark the box "Enable Secure Shell" from  System: Advanced functions  of the WebGUI and there you go with puTTY, WinSCP et al.

I know how to do so, i just asked myself the reason why it can not be done through the gui, and if it was do able to get it in the GUI?

Found that it is in 2.0.

Thanks for the reply!

regards,
Johan

I've only got a single IP address, so it's pretty much useless huh?  I think I'll boot it up and see what it's got but I'm not expecting anymore.