Some clues? How to accomplish this?

I've been thinking about writting a curl php script which login to the Web interface and toggle the checkbox to disable/enable shapper. However, I suppose there must be an easier way.

Please pfsense gurus, help.

It turns out my audio quality problems might not be traffic shaper related at all.  Not sure, but found bad checksums using a packet capture today.

Here is my new post regarding the new find:  http://forum.pfsense.org/index.php/topic,21380.0.html

@ermal:

Actually on 1.2.3 you can shape inside the tunnel but i am not sure if the rules allow this to be setuped.
On 2.0 it is surely possible.

In 1.2.3 how do you shape inside the tunnel?  Would it be with firewall rules?  Or a traffic shaper rule?

I'm curious because we have remote SIP extensions I would LOVE to run over our IPSEC instead of the internet.  But they also run a lot of SMB traffic over IPSEC, so I absolutely HAVE to shape the data within the tunnel for it to sound good.  Thanks.

is traffic shaping on wireless to lan bridged interfacing working with any1 coz i just dont see the wireless traffic falling into any configured queue other than the default queue.

pfSense is not based linux. It's based on FreeBSD.

No you cannot shape directly based on MACs.
However what you can do: create static IP <–> MAC pairings.
Like this you can make sure that a MAC always has the same IP.

Let us know.  If it is an outbound BW shaping issue, there are posts here that address this.

@danswartz:

The default location for these is in sip_general_additional.conf, but you tweak them in sip_general_custom.conf.  Like this:

tos_sip=0
tos_audio=0

NB: this is for a freepbx-based system.  If yours is not, you need to figure out where to set these for your setup.

Been looking for this solution for a long time. Thanks. Im on the PBXInAFlash asterisk flavor….

i made this post about year ago referencing an older post with the same issue with no resolution, never got a reply. hope you have better luck

I'm confused.  If the two computers are on the same subnet, the pfsense should not even be involved.  Can you describe your network topology more clearly?

@daftaronline:

There were error(s) loading the rules: pfctl: real-time sc exceeds 80% of the interface bandwidth (51.20Kb)/tmp/rules.debug:23: errors in queue definition pfctl: real-time sc exceeds 80% of the interface bandwidth (416Kb) /tmp/rules.debug:24: errors in queue definition pfctl: Syntax error in config file: pf rules not loaded – The line in question reads [ real-time sc exceeds 80% of the interface bandwidth (51.20Kb) /tmp/rules.debug]: …

when i enter trafic shaping wizard and click finish i get that warning. please help me… thx

Obviously you have set some initial values that are not possible. As you see, realtime traffic can only exceed 80% of interface bandwidth. Try using percentage values.

BR,

Tommi

@pippolini:

Same as above….

can anyone help us out here? i want to donate to the project in exchange for the new bounty.

i tried running 2.0 BUT, i cannot migrate my 1.2.3rc1 over to it. even tried restoring only certain sections.
please, all i need is the new shaper on the more stable RC.