So you are looking for something like:

General Tab

Thanks

Interesting idea for sure.

Thank You for reply drcasper. Iwill try that

I'd donate some bucks from my personal purse ($50?) if l2tp ipsec gets implemented (and is compatible with Win7/8, OSX, iOS and Android). I'm currently using a Zywall which does l2tp/ipsec and is compatible with all those platforms - i'd like to replace that Zyxel hardware.

Please send me a PM if that's still an option.

@siralos:

@siralos:

I'll throw in 20$ as well.

OP: Perhaps update the title to reflect that the bounty is higher.

I shall hereby withdraw the above offer to chip in, as I have managed to create the script myself.

Any details you can share, specifically on the pfsense commands used?  Gathering the port is well documented from PIA; but the pfsense update commands would be helpful.

I replied back on the thread - it sounds like a link speed/duplex mismatch. If you check Status > Interfaces and find errors/collisions that is most certainly the case.

If that is the problem and it is solved by hardcoding the speed/duplex in the advanced settings on Interfaces > WAN, feel free to donate that amount to the project (link in my sig).

Is this a completely new setup or is the pfSense box replacing some existing VPN concentrator?

Are you looking for load balancing or simply redundant connections?

Some brief description of the network operation would probably help here.

Steve

done, thank You !

I need a feature, either CLI or GUI, that allows me to configure to drop every package that has a TCP-option with kind 30.
Iptables e.g. has a command line switch –tcp-option xx that matches every package with a tcp-option of kind xx.
Since I need it only for MPTCP-packages, it is not necessary (but it would be nice) to work with all kind of TCP-options, it can also be hardcoded to work only with kind 30.

I hope that answers your question.

Thanks in advance,

SimPru

well, you tried it and I appreciate this :-)

oh right ok. Thank you. Could be worth putting it in as an option for future.

Thank you.

I will try to configure it on the dev version then.

Thanks.

Just sent a PM.  :)

http://forum.pfsense.org/index.php/topic,68227.0.html

Hello, I have been working on it a bit and have been able to put together something like this so far.

List Radius server status for selected zone. For each zone it will get the Authentication Protocol, all the Radius IPs (upto 4 per zone), and Auth Port if entered (1812 default) and Secret Key for each IP. I have not yet added an ability to change the username and password (just using test//testing123). It should be possible though. It also logs the data to /tmp/radiusstatus.log

Screen shot for Services -> Captive Portal

and the resulting Status -> Captive Portal page

(my radius server was down during the test haha) If you would like I can probably add a tab in Status for Radius Servers if you would like to keep the status of Captive Portals and the Radius Servers separate. Also from what I tried, you need to add the freeradius package. (I only added the FreeBSD one, might be better to add the pfSense one for more control.)

Let me know if you are interested and if so how you would prefer it. Also if I do end up finishing it for the bounty I would like to be able to provide the changes to everyone.

This bounty is done.

the thread listed above, i checked that, i had added an additional post to it to make it connect to ipvanish servers, all u need to do is enable AON and then use firewall rules to route selected traffic out of it