@mohkhalifa Couldn't you just use this one ? https://forum.netgate.com/topic/161025/to-2-5-0-or-not-that-is-the-question/69

@cdbrown2018 You will have to find a way to connect pfSense to the wireless network. pfSense itself doesn't support wireless hardware like wifi ac sticks well. But depending on your hardware, you may run for instance a Linux on bare metal and virtualize pfSenes on it. So you can abstract the hardware layer for pfSense.

@gertjan Thank you very much

@shjfliejfasel Now you done it. You forced me to do an archaeological dig through my "Junque" box to find a 9 pin - 9 pin null modem cable, so I could try it with my firewall. BTW, it works.

@jvamos Don't confuse Bytes (B) with bits (b). Bytes generally refer to an amount of data, such as with disk space, but bits refer to a transmission rate. A byte = 8 bits.

@stephenw10 The strange thing is that i used this kind of configuration on an other host PC, with fewer VMs and this problem did not occur. Then the version of the pfSense was older.

Redmine issue created: https://redmine.pfsense.org/issues/11495

@stephenw10 very interesting document thank you

@viragomann Great, thank you very much https://en.wikipedia.org/wiki/Classless_Inter-Domain_Routing

@johnpoz Very interesting document thanks. https://tools.ietf.org/html/rfc8375

@stephenw10 me too. link text

I not sure if that is available via gui? But its a simple ssh-keygen command ssh-keygen -lf ssh_host_ed25519_key.pub Should work - the file would be in /etc/ssh [image: 1613848679423-fingerprint.png] You can run it from the gui like this [image: 1613848801580-gui.png]

@traveller Thank you! That seems to have fix it until there is an official bug squash.

@gertjan ok thank you :-)

Sure... Step 1: Go to System -> Update and select "Previous stable branch (2.4.5 DEPRECATED) Step 2: At the command line (ssh or console) to install, e.g., nano use pkg-static install nano

@rummonkey69 im not ruling out this bug as the issue [image: 1613825672022-7da4ff27-28bb-4a03-ae79-ac65de1c2fd6-image.png]

@rummonkey69 clean install and its works ok. doesn't work for me after doing an upgrade