The NAT rules all specify an interface on which a packet enters the box. Possibly when you access the URL from another machine on the network the packet enters the box on a different interface and hence doesn't match your NAT rule.

good call on the console and thanks for the information! I live in Indiana and before I left the server in Boston, MA I setup a serial cable just in case to the PFSense box so if something happens I can get into that work on it remotely. Thank you again and I hope the upgrade goes well :)  I have been looking forward to the feature-set in 2.0!!!!

Stupid me, the crappy editor i used just did not show the ä. So i did not find it.

Hi, I have the same Issue, I must set the media to 100baseTX FD, and the xml config is erased (I tried downloading the interface config, modifying the xml, uploading / re-downloading). After the upload of the config, I go to Status > Interfaces and the media is still on autoselect, although I reboot.

Was you reply came in I was postinvg the following: After leaving it for a day I returned to trouble shoot and noticed that the logs where now fine… enabled squid and safesquid and its working.... I'm inclined to go with your faulty disk diagnosis....The next question then is how does one transfer this to a new disk??  But I suppose that's for a different forum.

Yes it's possible doing exactly as you describe. Please don't hijack old threads, start new ones if you're not responding to that person.

Well it should be known for long now that you need 9600 for pfSense on Alix ;)

Had a chance to check it today. Thank you for pointing out my mistake. Somehow I missed that authentication should be set to "Local user manager" when using vouchers and mine setting was set to "No Authentication". Thanks!

To all the PF sense admins that work on this product. i just want to say Thank You. if its down that is fine. I DO appreciate the information being relayed to us on the message board for your FANTASTIC product. Thank you for your time that you put in for this product and answering posts here on the boards.

This was a good read on some traffic shaper commits http://forum.pfsense.org/index.php/topic,33568.msg173963.html#msg173963

IIRC It doesn't do realtime reporting, it normally only reports flows that it watched start and stop. After a connection closes, you should see a flow generated about the former connection. I don't remember if pfflowd support periodic reporting or not though… You might try softflowd, there are directions on the wiki for using it.

Fixed, thanks! https://rcs.pfsense.org/projects/pfsense/repos/mainline/commits/87ae1a2b4abf86d2710982f58bc312c5e312168d

"soon" :-)

Same problem with PPTP VPN and MultiWan. Connections coming threw WAN1 and outgoing threw WAN2. I noticed that outgoing vpn is sent threw Default Gateway, witch is my WAN2. Solution for me was changing listening wan port to WAN2. No problems since ehen. http://forum.pfsense.org/index.php/topic,33584.msg174269.html#msg174269