It's a shame, the "beep" was interesting for various reasons.

Thanks for your reply ;-)

@stephenw10,

I think that captures it very nicely!

Phizix

P.S. I actually own an SG-3100 which I have not used much as I switched to SG-5100, and I copped another SG-5100 on eBay for a very good price as a backup. 🙄

@Gertjan

I do have that ticked.

I have connected my switch the firewall. And when assigned all to the port I can access the net, however when I assign one of the VLANS i do not have access to the net. I only have one firewall rule to allow all traffic. Is there something I could have done wrong when creating the VLANS or is the problem in the switch setup?

I have no specific recommendation here but the PSU in the 1541 is pretty standard AFAIK.

Steve

It probably failed to upgrade completely. I'd guess you're running a mismatched kernel and world.

Try option 8 to drop to the CLI, that usually works in that situation. Reboot from there but just entering 'reboot' and check for errors at boot on the console.

You may need to reinstall if it can't be recovered so do you have a backup of the config?

Steve

@SteveITS thanks for the information… I will follow-up and report back once I get this going.

Thanks!

You would still see output from uboot at the serial console if it's connected correctly.

https://docs.netgate.com/pfsense/en/latest/solutions/sg-1100/connect-to-console.html

Steve

@Amenophisphp Yes it is when it comes to configuration. It will not contain any logs or statistics from usage, but that is not needed (only for historic performance analysis)

@SteveITS Awesome - thanks so much for the insights.

@IonutIT So you don't cook waffles on yours?

I thought that was a feature.

☕️

Yes, the only time you should have to do anything with the uboot envs is if you change the boot device. So usually only if you add an m.2 SSD.

See step 7 here: https://docs.netgate.com/pfsense/en/latest/solutions/sg-3100/m-2-sata-installation.html

Hard to know exactly what happened to @eyes here without seeing the boot loop output. We have seen the uboot envs become corrupted in the past so that is possible. That would require rewriting them.

Steve

I would run dmesg then connect the 1100 console then run dmesg again and look at what was added. Or you can probably use System Profiler to get the USB device details but I have nothing to check that on right now.

Hmm, that's weird. Is it a separate interface? What did you set the gateway to?

Thanks Jimp 👍

Yes some things require the actual admin/root account, not just an account with admin privileges. Packet captures for example.

@stephenw10 said in Package weight SG-4100:

No that's fine for the actual core temperature.

Thank you stephenw10 👍

@mm404 Request the firmware from us and reinstall form the image -- that's the best way to make sure the system is clean.

The image you get from us will be directly written to your storage media in the 2100.

the olny thing that scares me is these switch lagg ports,

@tjabas They're not that bad. Just be willing to ask here for help and we'll be nearby.

@robbiett said in Trade-In Program?:

@defenderllc I got mine from a guy who was doing exactly that - a move from a 6100 to 8200.

☕️

Sounds like you need another one to setup HA! 😂