Subcategories

  • Discussions about packages which handle caching and proxy functions such as squid, lightsquid, squidGuard, etc.

    4k Topics
    21k Posts
    N

    Can I use pgblockerng aliases in Haproxy?

    80758505-9bad-4dad-a80b-c159be1045a2-image.png

    If it was a firewall rule, typing pfb would produce a dropdown to select.

    Here it has to be written, but will it work? Is it supported?

  • Discussions about packages whose functions are Intrusion Detection and Intrusion Prevention such as snort, suricata, etc.

    2k Topics
    16k Posts
    cyb3rtr0nianC

    @bmeeks So after upgrading to the newest PfSense 2.8.0 everything is now working like a charm!

    Suricata no longer seems to strip off tags like it did before! Which means I can now use my network segmented by VLANs and still use the benefits of Suricata Inline IPS! Very niiize!

    I checked in the Alerts section and it is indeed generating the correct alerts from the different VLAN sections, I put Inline IPS on the parent interface of all the VLANs.

    I assume this is because the FreeBSD version is also updated with the new PfSense 2.8.0 version?

    Because before, as soon as I selected Inline IPS mode, my entire VLAN tagging would break and nothing was reachable until I switched back to Legacy mode.

  • Discussions about packages that handle bandwidth and network traffic monitoring functions such as bandwidtd, ntopng, etc.

    571 Topics
    3k Posts
    K

    @pulsartiger
    The database name is vnstat.db and its location is under /var/db/vnstat.
    With "Backup Files/Dir" we are able to do backup or also with a cron.

  • Discussions about the pfBlockerNG package

    3k Topics
    20k Posts
    reza3swR

    @Gertjan
    Hello,
    Thank you.
    I had exactly the same issue, and your solution helped me fix it.

    Ask ChatGPT

  • Discussions about Network UPS Tools and APCUPSD packages for pfSense

    101 Topics
    2k Posts
    dennypageD

    @jhg Please post the output of the following commands:

    pkg info | grep nut usbconfig dump_all_desc
  • Discussions about the ACME / Let’s Encrypt package for pfSense

    493 Topics
    3k Posts
    GertjanG

    @EChondo

    What's your pfSense version ?
    The instructions are shown here :

    1acdc586-cb29-4148-9e36-81ade4e5e60c-image.png

    A restart of a service will start by re creating their config files. If a certificate changed, it will get included. When the process starts, it will use the new certificate.

    @EChondo said in Issue with ACME Certificates Refresh & Restarting HAProxy:

    I haven't been able to confirm if the above works(mine just renewed, don't feel like doing it again just to test), so we'll see in 60 days I guess.

    No need to wait x days.
    You can re test / renew right away, as you are 'allowed' to renew a couple (5 max ?) of times per week.

  • Discussions about the FRR Dynamic Routing package on pfSense

    294 Topics
    1k Posts
    R

    I had a similar issue with Routed VTI over IPsec recently. FRR lost its neighbors after rebooting or when a tunnel went down. It never re-discovered it automatically. Only restarting FRR (either in GUI or via CLI) brought the neighbors back.

    When I manually added those under the OSPF neighbors tab in the GUI it seems to solve the problem as well.

  • Discussions about the Tailscale package

    89 Topics
    574 Posts
    A

    Hello,
    I am unable to get the Tailscale package to work. The page at VPN > Tailscale > Authentication is stuck. It displays the error "Tailscale is not online," but also shows a "Logout and Clean" button, with no option to log in.
    link text

    This state persists even after performing the following troubleshooting steps:

    Rebooting the pfSense router.

    Completely uninstalling and reinstalling the Tailscale package multiple times.

    Clearing browser cache and using a private browser window.

    Toggling the main "Enable Tailscale" checkbox in the settings.

    Checking the logs, which show the service gets a "terminate" signal and shuts down cleanly; it does not crash.

    Manually trying to delete the state file with rm /var/db/tailscale/tailscaled.state, which failed because the file does not exist.

    It appears that the package's configuration is corrupted in a way that persists even after reinstallation. Can anyone advise on how to perform a complete manual cleanup of all Tailscale files and settings?

  • Discussions about WireGuard

    690 Topics
    4k Posts
    J

    I've read through some other posts about this, but they either didn't say whether the proposed solution worked or they were very convoluted and difficult to understand. Here is our scenario: We have 6 locations--Las Cruces (LC), Sunland Park (SP), El Paso (EP), Abilene (ABI), Fort Worth (FW), and Plano (PL). LC and ABI have software that is accessed by the other 4 locations via VPN. There are WireGuard VPNs set up between LC and those 4 locations (SP, EP, FW, PL), and ABI and those 4 locations (SP, EP, FW, PL). There is also a WireGuard VPN connection between LC and ABI. LC and ABI have 2 internet connections. SP, EP, FW, and PL each have one internet connection.

    If the primary internet connection goes down at either LC or ABI and failover occurs to the secondary internet connection, is there a way to set up the WireGuard VPN connections so that they also failover without purchasing some 3rd party application?

    Thanks.

  • Spamd listening port?

    Locked
    5
    0 Votes
    5 Posts
    2k Views
    J

    And thus my spam increase issue thanks to comcast blocking 25 both ways.  Thanks for the info.

  • Flush/Clear SQUID Cache.

    Locked
    1
    0 Votes
    1 Posts
    2k Views
    No one has replied
  • [p3scan] Target ip error!

    Locked
    7
    0 Votes
    7 Posts
    4k Views
    N

    @NicolaPaone:

    @ron:

    firewall,

    It will be a few days possibly, but I'll put together a new update to the p3scan package shortly that fixes your issue.  I got approval from the original pfSense package maintainer to take over the maintainership, and I've been working on an update to the package.  The issue you are seeing is that the original p3scan-pf port does not correctly account for the packet redirect when using the PF redirection (i.e. the code doesn't look up the original sender IP address correctly in the TCP packet when using it in transparent mode, and it then sees itself as the original packer sender which loops).  The issue has nothing to do with the pfSense package, and is a bug in the base p3scan port to FreeBSD.  I have fixed it and have it working on one of my systems now.  I just need some time to get the patches together.

    I also have an update to the ClamAV pfSense package coming too that goes with this for AV scanning.  I'll have to get someone in the coreteam to post the updates when they are ready.

    Regards,
    Ron

    Hello everyone,
    I too found the bugs in question … I even tried to compile the package p3scan, but nothing ...

    Under linux (debian), no problem ... everything works the first blow.
    I believe both bugs p3scan for BSD.

    If I may give you a hand, I'm happy to collaborate with you.

    Let me know ....

    @Ron
    news???

  • IMSpector: Whitelist full access not working for MSN

    Locked
    1
    0 Votes
    1 Posts
    2k Views
    No one has replied
  • Changing ftp local packages???

    Locked
    15
    0 Votes
    15 Posts
    16k Views
    X

    I don't know what dependancies exist with my pb so which command is dangerous ?

  • Does IMSpector in Pfsense supports to mail out the LOG ?

    Locked
    2
    0 Votes
    2 Posts
    2k Views
    R

    You would have to write a shell script. If using file logging the logs would be stored in /var/imspector

  • Snort memory leak ?

    Locked
    3
    0 Votes
    3 Posts
    2k Views
    P

    You were right, the first time I increased memory I did not add enough

    Finally, I add 400M Memory and is working fine now,

    thanks for your help

  • Can't install WGET package (or other one)

    Locked
    11
    0 Votes
    11 Posts
    15k Views
    X

    In the beginning I want to correct my problem starting, because I can not install any package. (I am not against the use of fetch)

  • LightSquid Configuration / DNS Name Issues

    Locked
    5
    0 Votes
    5 Posts
    6k Views
    D

    Check working with 'Demo  - return AUTHNAME, else DNSNAME, else IP  '
    But any changing 'IP resolve method (future)' option take effect for new refreshing.

  • Squid configuration

    Locked
    2
    0 Votes
    2 Posts
    2k Views
    Cry HavokC

    (This belongs in the Packages forum)

    Yes, there is a GUI - try installing Squid and have a look.

  • Browse with our without proxy settings

    Locked
    5
    0 Votes
    5 Posts
    2k Views
    F

    I think this is the awnser:

    As you can see, pressing reload in Netscape (and some other browsers) doesn't simply re-fetch the page, it forces the cache not to serve the cached page. Many people doing tests of how the cache increases performance simply press reload, and believe that there has been no change in speed. The cache is, in fact, re-downloading the page from the origin server, so a speed increase is impossible.

    To test the cache properly you need two machines setup to access the cache, and a page that does not contain do not cache me headers. Pages that use ASP often include headers that force Squid not to cache the page, even if the authors are not aware of it's implications.

    So, to test the cache, choose a site that is off your local network (for a marked change, choose one in a different country) and access it from the first machine. Once it has download, change to the second machine and re-download the page. Once the page has downloaded there, check that the page is marked as a 'HIT' (in the file called access.log - the basics of which are covered earlier in this book). If the second accesses were marked as misses, it is probably because the origin server is asking Squid not to cache the page. Try a different page and see difference the cache makes to browsing speed.

    Many people are looking for an increase in performance on problem pages, since this is when people believe that they are getting the short end of the stick. If you choose a site that is too close, you may only be able to see a difference in the speed in the transaction-time field of the access.log.

  • Squid working?

    Locked
    4
    0 Votes
    4 Posts
    2k Views
    F

    I've the same thing. When I go to sites were are pictures to download with a slideshow, and I go back to the same URL, it seems that the pictures are not comming from the proxy but directly from the internet.
    Can this be a bug?

  • SquidGuard update

    Locked
    6
    0 Votes
    6 Posts
    2k Views
    D

    @Monoecus:

    I noticed one typo in the explanations above the blacklist sections: 4-all rule('allow' ro 'deny') should be an 'or' right?
    Besides, I saw that the Shallalist has been updated with new categories.

    Thanks must be "4-all rule('allow' or 'deny')"
    About Shallalist - this not my work  ???.

  • New version of snort

    Locked
    12
    0 Votes
    12 Posts
    6k Views
    J

    Did you guys figure this out? I'm getting the same error now. It happens while snort is loading the rules, right after startup.

  • SQUID 2.6.18.1 / cannot browse specific pages ?

    Locked
    11
    0 Votes
    11 Posts
    6k Views
    G

    Coming back to the reply of "Perry"

    Also i can confirm the problem
    http://www.squid-cache.org/bugs/show_bug.cgi?id=2342
    Collected the data and as fare what i can see it is a http 1.0 / http 1.1 problem (Attach doc's)

    Is the http 1.0 / http 1.1 problem caused by the server or by SQUID or by PFSense
    I have to apologize but I am not a network specialist and do use SQUID somehow as "blackbox"

    regards

    Günther

  • HOWTO : configure freeradius

    Locked
    3
    0 Votes
    3 Posts
    3k Views
    D

    What are you wanting to do with FreeRADIUS? Are you trying to do something with the pfSense captive portal, or are you wanting to use it for wireless network authentication? There's many ways to configure FreeRADIUS - but only you know what you want to do.

    I don't use FreeRADIUS on pfSense, but I do maintain the FreeRADIUS packages for FreeBSD (which, amongst other things, underpins FreeRADIUS on pfSense) and I use FreeRADIUS on one of my FreeBSD servers. When I get the time, I will try to set up the pfSense FreeRADIUS package to see what it can do - but I have so many things to be getting on with at present.

  • Manual download of Snort rules

    Locked
    4
    0 Votes
    4 Posts
    2k Views
    M

    Ah well, thanks. :-)

    I'll try Snort on some better hardware.

  • Transparent bridge mode to DMZ, and NAT to private LAN, and Snort?

    Locked
    2
    0 Votes
    2 Posts
    7k Views
    M

    Well, I've got pfSense bridging the WAN to the DMZ whilst NATting the Private LAN. So far so good. I'm trying to get Snort working now.

    I must say that pfSense is an excellent firewall; it is remarkably flexible and has a vast range of configuration options.

    Well done!!

  • Proxy setup tutorial

    Locked
    13
    0 Votes
    13 Posts
    6k Views
    J

    @GruensFroeschli:

    No.
    You can. But you dont have to.

    in some banana countries, yes, you have to :)

    and, yes it works fine over open dns, and over squid, but cant support multiple WANs  ??? :-\

  • Snort fails to start on rule initialization

    Locked
    2
    0 Votes
    2 Posts
    2k Views
    J

    I had the same problem, and I've just been running without those rules. I'm guessing that this rule is responsible:

    223 udp $EXTERNAL_NET any $HOME_NET [31335,35555] DDOS Trin00 Daemon to Master PONG message detected

    Edit: I disabled that rule, and it starts up fine. I guess the syntax on the port specification is incorrect.

Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.