1. Home
  2. pfSense Packages

Subcategories

  • Discussions about packages which handle caching and proxy functions such as squid, lightsquid, squidGuard, etc.

    4k Topics
    21k Posts
    N

    Can I use pgblockerng aliases in Haproxy?

    80758505-9bad-4dad-a80b-c159be1045a2-image.png

    If it was a firewall rule, typing pfb would produce a dropdown to select.

    Here it has to be written, but will it work? Is it supported?

  • Discussions about packages whose functions are Intrusion Detection and Intrusion Prevention such as snort, suricata, etc.

    2k Topics
    16k Posts
    cyb3rtr0nianC

    @bmeeks So after upgrading to the newest PfSense 2.8.0 everything is now working like a charm!

    Suricata no longer seems to strip off tags like it did before! Which means I can now use my network segmented by VLANs and still use the benefits of Suricata Inline IPS! Very niiize!

    I checked in the Alerts section and it is indeed generating the correct alerts from the different VLAN sections, I put Inline IPS on the parent interface of all the VLANs.

    I assume this is because the FreeBSD version is also updated with the new PfSense 2.8.0 version?

    Because before, as soon as I selected Inline IPS mode, my entire VLAN tagging would break and nothing was reachable until I switched back to Legacy mode.

  • Discussions about packages that handle bandwidth and network traffic monitoring functions such as bandwidtd, ntopng, etc.

    571 Topics
    3k Posts
    K

    @pulsartiger
    The database name is vnstat.db and its location is under /var/db/vnstat.
    With "Backup Files/Dir" we are able to do backup or also with a cron.

  • Discussions about the pfBlockerNG package

    3k Topics
    20k Posts
    reza3swR

    @Gertjan
    Hello,
    Thank you.
    I had exactly the same issue, and your solution helped me fix it.

    Ask ChatGPT

  • Discussions about Network UPS Tools and APCUPSD packages for pfSense

    101 Topics
    2k Posts
    J

    @dennypage Here it is, complete (rather long)

    [2.8.0-RELEASE][admin@janus.jhmg.pvt]/root: pkg info | grep nut nut-2.8.2 Network UPS Tools pfSense-pkg-nut-2.8.2_5 Network UPS Tools

    Here's what Package Manager has:

    nut-pkg-manager.png

    [2.8.0-RELEASE][admin@janus.jhmg.pvt]/root: usbconfig dump_all_desc ugen0.1: <Intel XHCI root HUB> at usbus0, cfg=0 md=HOST spd=SUPER (5.0Gbps) pwr=SAVE (0mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0300 bDeviceClass = 0x0009 <HUB> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0003 bMaxPacketSize0 = 0x0009 idVendor = 0x0000 idProduct = 0x0000 bcdDevice = 0x0100 iManufacturer = 0x0001 <Intel> iProduct = 0x0002 <XHCI root HUB> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x001f bNumInterfaces = 0x0001 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes = 0x0040 bMaxPower = 0x0000 Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0001 bInterfaceClass = 0x0009 <HUB> bInterfaceSubClass = 0x0000 bInterfaceProtocol = 0x0000 iInterface = 0x0000 <no string> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0002 bInterval = 0x00ff bRefresh = 0x0000 bSynchAddress = 0x0000 Additional Descriptor bLength = 0x06 bDescriptorType = 0x30 bDescriptorSubType = 0x00 RAW dump: 0x00 | 0x06, 0x30, 0x00, 0x00, 0x00, 0x00 ugen0.2: <Hub Terminus Technology Inc.> at usbus0, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE (100mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0009 <HUB> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0001 bMaxPacketSize0 = 0x0040 idVendor = 0x1a40 idProduct = 0x0101 bcdDevice = 0x0111 iManufacturer = 0x0000 <no string> iProduct = 0x0001 <USB 2.0 Hub> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0019 bNumInterfaces = 0x0001 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes = 0x00e0 bMaxPower = 0x0032 Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0001 bInterfaceClass = 0x0009 <HUB> bInterfaceSubClass = 0x0000 bInterfaceProtocol = 0x0000 iInterface = 0x0000 <no string> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0001 bInterval = 0x000c bRefresh = 0x0000 bSynchAddress = 0x0000 ugen0.3: <Dell MS116 Optical Mouse Dell Computer Corp.> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x413c idProduct = 0x301a bcdDevice = 0x0100 iManufacturer = 0x0001 <PixArt> iProduct = 0x0002 <Dell MS116 USB Optical Mouse> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0022 bNumInterfaces = 0x0001 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes = 0x00a0 bMaxPower = 0x0032 Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0001 bInterfaceClass = 0x0003 <HID device> bInterfaceSubClass = 0x0001 bInterfaceProtocol = 0x0002 iInterface = 0x0000 <no string> Additional Descriptor bLength = 0x09 bDescriptorType = 0x21 bDescriptorSubType = 0x11 RAW dump: 0x00 | 0x09, 0x21, 0x11, 0x01, 0x00, 0x01, 0x22, 0x2e, 0x08 | 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0004 bInterval = 0x000a bRefresh = 0x0000 bSynchAddress = 0x0000 ugen0.4: <Multimedia Keyboard Lite-On Technology Corp.> at usbus0, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON (100mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0110 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0008 idVendor = 0x04ca idProduct = 0x003a bcdDevice = 0x0115 iManufacturer = 0x0001 <Lite-On Technology Corp.> iProduct = 0x0002 <USB Multimedia Keyboard> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x003b bNumInterfaces = 0x0002 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes = 0x00a0 bMaxPower = 0x0032 Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0001 bInterfaceClass = 0x0003 <HID device> bInterfaceSubClass = 0x0001 bInterfaceProtocol = 0x0001 iInterface = 0x0000 <no string> Additional Descriptor bLength = 0x09 bDescriptorType = 0x21 bDescriptorSubType = 0x10 RAW dump: 0x00 | 0x09, 0x21, 0x10, 0x01, 0x00, 0x01, 0x22, 0x41, 0x08 | 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0008 bInterval = 0x000a bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0000 bNumEndpoints = 0x0001 bInterfaceClass = 0x0003 <HID device> bInterfaceSubClass = 0x0000 bInterfaceProtocol = 0x0000 iInterface = 0x0000 <no string> Additional Descriptor bLength = 0x09 bDescriptorType = 0x21 bDescriptorSubType = 0x10 RAW dump: 0x00 | 0x09, 0x21, 0x10, 0x01, 0x00, 0x01, 0x22, 0x4e, 0x08 | 0x00 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0082 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0008 bInterval = 0x000a bRefresh = 0x0000 bSynchAddress = 0x0000 ugen0.5: <PR1500LCDRT2U UPS Cyber Power System, Inc.> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (2mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0200 bDeviceClass = 0x0000 <Probed by interface class> bDeviceSubClass = 0x0000 bDeviceProtocol = 0x0000 bMaxPacketSize0 = 0x0040 idVendor = 0x0764 idProduct = 0x0601 bcdDevice = 0x0200 iManufacturer = 0x0003 <CPS> iProduct = 0x0001 <CP1500PFCLCDa> iSerialNumber = 0x0002 <CXXJV2014210> bNumConfigurations = 0x0001 Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x0029 bNumInterfaces = 0x0001 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes = 0x00c0 bMaxPower = 0x0001 Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x0003 <HID device> bInterfaceSubClass = 0x0000 bInterfaceProtocol = 0x0000 iInterface = 0x0000 <no string> Additional Descriptor bLength = 0x09 bDescriptorType = 0x21 bDescriptorSubType = 0x10 RAW dump: 0x00 | 0x09, 0x21, 0x10, 0x01, 0x21, 0x01, 0x22, 0xd1, 0x08 | 0x02 Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0040 bInterval = 0x000a bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0002 <OUT> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0040 bInterval = 0x0014 bRefresh = 0x0000 bSynchAddress = 0x0000 ugen0.6: <AX201 Bluetooth Intel Corp.> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON (100mA) bLength = 0x0012 bDescriptorType = 0x0001 bcdUSB = 0x0201 bDeviceClass = 0x00e0 <Wireless controller> bDeviceSubClass = 0x0001 bDeviceProtocol = 0x0001 bMaxPacketSize0 = 0x0040 idVendor = 0x8087 idProduct = 0x0026 bcdDevice = 0x0002 iManufacturer = 0x0000 <no string> iProduct = 0x0000 <no string> iSerialNumber = 0x0000 <no string> bNumConfigurations = 0x0001 Configuration index 0 bLength = 0x0009 bDescriptorType = 0x0002 wTotalLength = 0x00c8 bNumInterfaces = 0x0002 bConfigurationValue = 0x0001 iConfiguration = 0x0000 <no string> bmAttributes = 0x00e0 bMaxPower = 0x0032 Interface 0 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0000 bAlternateSetting = 0x0000 bNumEndpoints = 0x0003 bInterfaceClass = 0x00e0 <Wireless controller> bInterfaceSubClass = 0x0001 bInterfaceProtocol = 0x0001 iInterface = 0x0000 <no string> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0081 <IN> bmAttributes = 0x0003 <INTERRUPT> wMaxPacketSize = 0x0040 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0002 <OUT> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0040 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 2 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0082 <IN> bmAttributes = 0x0002 <BULK> wMaxPacketSize = 0x0040 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0000 bNumEndpoints = 0x0002 bInterfaceClass = 0x00e0 <Wireless controller> bInterfaceSubClass = 0x0001 bInterfaceProtocol = 0x0001 iInterface = 0x0000 <no string> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0003 <OUT> bmAttributes = 0x0001 <ISOCHRONOUS> wMaxPacketSize = 0x0000 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0001 <ISOCHRONOUS> wMaxPacketSize = 0x0000 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 Alt 1 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0001 bNumEndpoints = 0x0002 bInterfaceClass = 0x00e0 <Wireless controller> bInterfaceSubClass = 0x0001 bInterfaceProtocol = 0x0001 iInterface = 0x0000 <no string> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0003 <OUT> bmAttributes = 0x0001 <ISOCHRONOUS> wMaxPacketSize = 0x0009 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0001 <ISOCHRONOUS> wMaxPacketSize = 0x0009 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 Alt 2 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0002 bNumEndpoints = 0x0002 bInterfaceClass = 0x00e0 <Wireless controller> bInterfaceSubClass = 0x0001 bInterfaceProtocol = 0x0001 iInterface = 0x0000 <no string> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0003 <OUT> bmAttributes = 0x0001 <ISOCHRONOUS> wMaxPacketSize = 0x0011 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0001 <ISOCHRONOUS> wMaxPacketSize = 0x0011 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 Alt 3 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0003 bNumEndpoints = 0x0002 bInterfaceClass = 0x00e0 <Wireless controller> bInterfaceSubClass = 0x0001 bInterfaceProtocol = 0x0001 iInterface = 0x0000 <no string> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0003 <OUT> bmAttributes = 0x0001 <ISOCHRONOUS> wMaxPacketSize = 0x0019 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0001 <ISOCHRONOUS> wMaxPacketSize = 0x0019 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 Alt 4 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0004 bNumEndpoints = 0x0002 bInterfaceClass = 0x00e0 <Wireless controller> bInterfaceSubClass = 0x0001 bInterfaceProtocol = 0x0001 iInterface = 0x0000 <no string> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0003 <OUT> bmAttributes = 0x0001 <ISOCHRONOUS> wMaxPacketSize = 0x0021 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0001 <ISOCHRONOUS> wMaxPacketSize = 0x0021 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 Alt 5 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0005 bNumEndpoints = 0x0002 bInterfaceClass = 0x00e0 <Wireless controller> bInterfaceSubClass = 0x0001 bInterfaceProtocol = 0x0001 iInterface = 0x0000 <no string> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0003 <OUT> bmAttributes = 0x0001 <ISOCHRONOUS> wMaxPacketSize = 0x0031 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0001 <ISOCHRONOUS> wMaxPacketSize = 0x0031 bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Interface 1 Alt 6 bLength = 0x0009 bDescriptorType = 0x0004 bInterfaceNumber = 0x0001 bAlternateSetting = 0x0006 bNumEndpoints = 0x0002 bInterfaceClass = 0x00e0 <Wireless controller> bInterfaceSubClass = 0x0001 bInterfaceProtocol = 0x0001 iInterface = 0x0000 <no string> Endpoint 0 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0003 <OUT> bmAttributes = 0x0001 <ISOCHRONOUS> wMaxPacketSize = 0x003f bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000 Endpoint 1 bLength = 0x0007 bDescriptorType = 0x0005 bEndpointAddress = 0x0083 <IN> bmAttributes = 0x0001 <ISOCHRONOUS> wMaxPacketSize = 0x003f bInterval = 0x0001 bRefresh = 0x0000 bSynchAddress = 0x0000

  • Discussions about the ACME / Let’s Encrypt package for pfSense

    493 Topics
    3k Posts
    GertjanG

    @EChondo

    What's your pfSense version ?
    The instructions are shown here :

    1acdc586-cb29-4148-9e36-81ade4e5e60c-image.png

    A restart of a service will start by re creating their config files. If a certificate changed, it will get included. When the process starts, it will use the new certificate.

    @EChondo said in Issue with ACME Certificates Refresh & Restarting HAProxy:

    I haven't been able to confirm if the above works(mine just renewed, don't feel like doing it again just to test), so we'll see in 60 days I guess.

    No need to wait x days.
    You can re test / renew right away, as you are 'allowed' to renew a couple (5 max ?) of times per week.

  • Discussions about the FRR Dynamic Routing package on pfSense

    294 Topics
    1k Posts
    R

    I had a similar issue with Routed VTI over IPsec recently. FRR lost its neighbors after rebooting or when a tunnel went down. It never re-discovered it automatically. Only restarting FRR (either in GUI or via CLI) brought the neighbors back.

    When I manually added those under the OSPF neighbors tab in the GUI it seems to solve the problem as well.

  • Discussions about the Tailscale package

    89 Topics
    574 Posts
    A

    Hello,
    I am unable to get the Tailscale package to work. The page at VPN > Tailscale > Authentication is stuck. It displays the error "Tailscale is not online," but also shows a "Logout and Clean" button, with no option to log in.
    link text

    This state persists even after performing the following troubleshooting steps:

    Rebooting the pfSense router.

    Completely uninstalling and reinstalling the Tailscale package multiple times.

    Clearing browser cache and using a private browser window.

    Toggling the main "Enable Tailscale" checkbox in the settings.

    Checking the logs, which show the service gets a "terminate" signal and shuts down cleanly; it does not crash.

    Manually trying to delete the state file with rm /var/db/tailscale/tailscaled.state, which failed because the file does not exist.

    It appears that the package's configuration is corrupted in a way that persists even after reinstallation. Can anyone advise on how to perform a complete manual cleanup of all Tailscale files and settings?

  • Discussions about WireGuard

    690 Topics
    4k Posts
    J

    I've read through some other posts about this, but they either didn't say whether the proposed solution worked or they were very convoluted and difficult to understand. Here is our scenario: We have 6 locations--Las Cruces (LC), Sunland Park (SP), El Paso (EP), Abilene (ABI), Fort Worth (FW), and Plano (PL). LC and ABI have software that is accessed by the other 4 locations via VPN. There are WireGuard VPNs set up between LC and those 4 locations (SP, EP, FW, PL), and ABI and those 4 locations (SP, EP, FW, PL). There is also a WireGuard VPN connection between LC and ABI. LC and ABI have 2 internet connections. SP, EP, FW, and PL each have one internet connection.

    If the primary internet connection goes down at either LC or ABI and failover occurs to the secondary internet connection, is there a way to set up the WireGuard VPN connections so that they also failover without purchasing some 3rd party application?

    Thanks.

Log in to post
Load new posts
  • M

    Squidguard… problems and questions

    Locked
    31
    0 Votes
    31 Posts
    40k Views
    J

    I was having some squidguard problems too and tracked down a different issue than what I've seen in this thread.

    I am attempting to run the shallalist rules and after a lot of troubleshooting I finally noticed in the squidguard log that it couldn't find blk_BL_politics

    I noticed that there's a blk_BL_politcs (notice no i) but not one with the proper spelling.  So I just symlinked the proper spelling to the improper spelling and after that it seems to work fine.

    Thanks to the package maintainer for providing this software.

  • M

    SIPROXD Transparent Proxy

    Locked
    10
    0 Votes
    10 Posts
    13k Views
    G

    I just got mine working. Here's a link to my post:

    http://forum.pfsense.org/index.php/topic,10084.0.html

  • F

    Anybody using SIP phones to external provider through SIPROXD?

    Locked
    3
    0 Votes
    3 Posts
    3k Views
    G

    I just got mine working. Here's a link to my post:

    http://forum.pfsense.org/index.php/topic,10084.0.html

  • E

    Packages were uninstalled?

    Locked
    8
    0 Votes
    8 Posts
    3k Views
    C

    Snort has some kind of problem that it uninstalls itself at reboot, I'm not sure if it's a problem with the package system or the snort package itself, one or the other has some sort of bug.

    It will retain the configuration.

  • P

    SpamD and Outlook plugin?

    Locked
    8
    0 Votes
    8 Posts
    4k Views
    ?

    Sure, I doubt anyone here is going to turn away someone willing to contribute.  I suspect you'd get a lot of interest if you make a plug-in for Thunderbird as well.

  • ?

    SpamD Package Needs Testers

    Locked
    80
    0 Votes
    80 Posts
    37k Views
    I

    @submicron:

    Please read the rest of the thread before complaining about things not working.  The button issue has been addressed in this thread, it does work, just not the way that you are expecting.

    The blacklist/whitelist count is currently broken and this has been reported to the developer as well.

    Finally, please do some reading to understand what spamd is and isn't.  It doesn't feature a way to blacklist or whitelist by domain.  That's not its intent.  Blacklists and whitelists are IP addresses only.  It also isn't meant to be the end-all, be-all of spam filtering.  It's meant to help stem the tide of spam and cut down the most obvious stuff.  It should be used in conjunction with a virus scanner on your mail server (at the very least).

    I did read and understand the entire thread, but since threads were aging and revision numbers weren't listed I was just making sure it hadn't been fixed and I was doing something wrong.  The whitelist button does /not/ work on my install, i understand that the page doesn't reload after the buttons are clicked- it's stated several times throughout the entire thread. I also understand how and what spamd does i was simply asking for an interface to the spamd.alloweddomains file, but since i'm not part of the bounty and this isn't the thread for that, forget about it.  The last question was about other peoples setups, i was simply curious if most were now running 3 boxes (PFsense  |  Clam/Razor | Mailserver). I thought I saw someone ask for configurations to be posted to help others out, and I figured that fell within the realm.  Here are my configs:

  • M

    Password protect lighttpd

    Locked
    5
    0 Votes
    5 Posts
    3k Views
    S

    system.inc …

  • C

    Hdparm on pfsense

    Locked
    3
    0 Votes
    3 Posts
    2k Views
    ?

    pfSense isn't gentoo.  Ricing it up isn't necessary or even a particularly good idea.

  • B

    Arping in 1.2 and newer

    Locked
    1
    0 Votes
    1 Posts
    1k Views
    No one has replied
  • V

    Just curious: Why ASSP no more? + ?'s

    Locked
    3
    0 Votes
    3 Posts
    2k Views
    V

    Thanks submicron!
    Yes, I plan on testing the SpamD package. (we might have a site to try soon)

    We like the feature set and configuration options of ASSP. (Email/Domain/Ip white list, Active Directory email validation of real email users. Not to mention the building/feeding, and whit listing of spam/not spam by users. But it also lacks some features) This is why I wanted to find out more of the history and where the old files could be. Wanted to try and see what i could do.

    It is a shame that it was not maintained…IMO...it is a good product.

    Maybe spamD has theses features and I just do not have my facts straight….will look more. (I do see IP white/black list)
    Thanks again

  • R

    Zabbix Client

    Locked
    35
    0 Votes
    35 Posts
    26k Views
    ?

    You're correct, the zabbix agent package doesn't start.  I modified it for my own purposes and got it working, but zabbix is a piece of crap and I scrapped it shortly thereafter.  Zabbix doesn't monitor FreeBSD properly so the Zabbix client, even if you get it working, will suck with a whole mouthful of teeth.

  • C

    Experimental TCP options

    Locked
    1
    0 Votes
    1 Posts
    2k Views
    No one has replied
  • D

    Can't uninstall snort??

    Locked
    6
    0 Votes
    6 Posts
    5k Views
    M

    @submicron:

    Then follow the instructions that hoba provided.

    I had another issue that a fan was broken and the device wouldn't restart because of this failing fan after placing the changed XML back, I directly moved my other backup FW into the vlan and had everything working in seconds… the same day I fixed it as I did before by removing the part from the XML as mentioned :)

    Thanks !

  • M

    Squid and lightsquid logging

    Locked
    4
    0 Votes
    4 Posts
    2k Views
    D

    Then I do not understand the question.  :P  My translator frightened.

  • F

    SpamD

    Locked
    2
    0 Votes
    2 Posts
    2k Views
    ?

    Read the forum thread on the subject, several people have already discussed their setup.

  • J

    LightSquid Issue

    Locked
    4
    0 Votes
    4 Posts
    2k Views
    J

    @jan:

    Hi Guys,

    I've installed Squid and LightSquid respectively, I've also tried installing squidguard but don't have to luck to make it work, just used OpenDNS instead ;D  anyways back to the real issue, LightSquid seems to be acting quite odd. Although there are reports on the LightSquid Report page but when I looked at it the results are quite odd, e.g., for this day the total bytes is only 4MB. I have more than two hundred users and I can't believe they will only consume that much. Another thing is when I looked at the individual ip's report and compared them, all of them browsed the same three sites which is not true.

    I think Squid stopped for some reason that is why there the LightSquid report is odd and pfSense gui is still saying that it's running.

    Has anybody encountered this issue? How did you resolved it?

    Many thanks in advance.

    Jan

    Helo, jan,

    Be careful, as submicron - Global Moderator - Sr. Member, said on: http://forum.pfsense.org/index.php/topic,5729.msg54580.html#msg54580

    "In fact, … installation of many packages, some of which are problematic."

    You can be triyng to install many packages (5 or more), and/or tryng to use a "problematic" package, or using it in conjuction with a "problematic" package.

    I sugest you, to try the same, but installing less packages.

    Regards.

  • R

    Update Proxy

    Locked
    2
    0 Votes
    2 Posts
    2k Views
    D

    @Rom:

    Hello,
    it is possible to automate update of blacklist on squidguard?

    In this version not relised.

  • X

    Snort signatures update issue?

    Locked
    22
    0 Votes
    22 Posts
    13k Views
    B

    I have tried both fixes (curl and ini_set - seperatley) but finding that it takes forever to download the rules files no matter what I use.
    If I download the exact same URL that /usr/local/www/snort_download_rules.php is using at the same time but on a desktop that is on the LAN net behind pfSense, it downloads in a couple of minutes. (no caches involved)

    Multiple attempts on the pfSense box return the same results.
    Traffic shaper is turned off and pfSense is 1.2 prod.

    ls on the temp dir (eg /tmp/snortRulesJ0rIr3/) show it downloading, but very slow ..
    -rw-r–r--  1 root  wheel  167363 Jun 14 20:02 snortrules-snapshot-CURRENT.tar.gz
    -rw-r--r--  1 root  wheel  6637801 Jun 14 20:26 snortrules-snapshot-CURRENT.tar.gz

    Once done, the rules file is a complete file, but Snort downloading seems to hang and does not download the md5 hash.

    Is there any other additional hacking needs to be done to the snort_download_rules.php file to allow it to progress ?
    Does anybody have the above fixes to consistently work ?

    Thanks.

  • X

    Proxy only for por 80

    Locked
    4
    0 Votes
    4 Posts
    3k Views
    X

    hello jose,

    i'm not a portugeese.. :) since mhab tell me bout the link, i followed that and its solved my probs.

    yes, i'll follow ur suggestion :) thanks for that…

  • N

    Snort crashed and won't restart correctly

    Locked
    7
    0 Votes
    7 Posts
    3k Views
    J

    There's a problem with the snort package (or maybe the web configurator?). Sometimes it does not put the full startup command in the snort startup config (/usr/local/etc/rc.d/snort.sh). If you look in that config, it should point to the snort binary, but sometimes after you make a configuration change that entry gets removed.

    I've also noticed that the web configurator's service page often does not show the correct status for whether snort is running (or not). The only way to know for sure is to login via ssh and look at the "top" status, or type "ps auxw | grep snort" to see if the process is running.

    Also… some of the rulesets do not work at all (snort will not startup). Additionally, if you run too many rules, snort will not start.

    It takes a bit of work to get the snort package to work reliably on pfsense.

Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.