Subcategories

  • Discussions about packages which handle caching and proxy functions such as squid, lightsquid, squidGuard, etc.

    4k Topics
    21k Posts
    N

    Can I use pgblockerng aliases in Haproxy?

    80758505-9bad-4dad-a80b-c159be1045a2-image.png

    If it was a firewall rule, typing pfb would produce a dropdown to select.

    Here it has to be written, but will it work? Is it supported?

  • Discussions about packages whose functions are Intrusion Detection and Intrusion Prevention such as snort, suricata, etc.

    2k Topics
    16k Posts
    cyb3rtr0nianC

    @bmeeks So after upgrading to the newest PfSense 2.8.0 everything is now working like a charm!

    Suricata no longer seems to strip off tags like it did before! Which means I can now use my network segmented by VLANs and still use the benefits of Suricata Inline IPS! Very niiize!

    I checked in the Alerts section and it is indeed generating the correct alerts from the different VLAN sections, I put Inline IPS on the parent interface of all the VLANs.

    I assume this is because the FreeBSD version is also updated with the new PfSense 2.8.0 version?

    Because before, as soon as I selected Inline IPS mode, my entire VLAN tagging would break and nothing was reachable until I switched back to Legacy mode.

  • Discussions about packages that handle bandwidth and network traffic monitoring functions such as bandwidtd, ntopng, etc.

    571 Topics
    3k Posts
    K

    @pulsartiger
    The database name is vnstat.db and its location is under /var/db/vnstat.
    With "Backup Files/Dir" we are able to do backup or also with a cron.

  • Discussions about the pfBlockerNG package

    3k Topics
    20k Posts
    reza3swR

    @Gertjan
    Hello,
    Thank you.
    I had exactly the same issue, and your solution helped me fix it.

    Ask ChatGPT

  • Discussions about Network UPS Tools and APCUPSD packages for pfSense

    101 Topics
    2k Posts
    dennypageD

    @jhg Please post the output of the following commands:

    pkg info | grep nut usbconfig dump_all_desc
  • Discussions about the ACME / Let’s Encrypt package for pfSense

    493 Topics
    3k Posts
    GertjanG

    @EChondo

    What's your pfSense version ?
    The instructions are shown here :

    1acdc586-cb29-4148-9e36-81ade4e5e60c-image.png

    A restart of a service will start by re creating their config files. If a certificate changed, it will get included. When the process starts, it will use the new certificate.

    @EChondo said in Issue with ACME Certificates Refresh & Restarting HAProxy:

    I haven't been able to confirm if the above works(mine just renewed, don't feel like doing it again just to test), so we'll see in 60 days I guess.

    No need to wait x days.
    You can re test / renew right away, as you are 'allowed' to renew a couple (5 max ?) of times per week.

  • Discussions about the FRR Dynamic Routing package on pfSense

    294 Topics
    1k Posts
    R

    I had a similar issue with Routed VTI over IPsec recently. FRR lost its neighbors after rebooting or when a tunnel went down. It never re-discovered it automatically. Only restarting FRR (either in GUI or via CLI) brought the neighbors back.

    When I manually added those under the OSPF neighbors tab in the GUI it seems to solve the problem as well.

  • Discussions about the Tailscale package

    89 Topics
    574 Posts
    A

    Hello,
    I am unable to get the Tailscale package to work. The page at VPN > Tailscale > Authentication is stuck. It displays the error "Tailscale is not online," but also shows a "Logout and Clean" button, with no option to log in.
    link text

    This state persists even after performing the following troubleshooting steps:

    Rebooting the pfSense router.

    Completely uninstalling and reinstalling the Tailscale package multiple times.

    Clearing browser cache and using a private browser window.

    Toggling the main "Enable Tailscale" checkbox in the settings.

    Checking the logs, which show the service gets a "terminate" signal and shuts down cleanly; it does not crash.

    Manually trying to delete the state file with rm /var/db/tailscale/tailscaled.state, which failed because the file does not exist.

    It appears that the package's configuration is corrupted in a way that persists even after reinstallation. Can anyone advise on how to perform a complete manual cleanup of all Tailscale files and settings?

  • Discussions about WireGuard

    690 Topics
    4k Posts
    J

    I've read through some other posts about this, but they either didn't say whether the proposed solution worked or they were very convoluted and difficult to understand. Here is our scenario: We have 6 locations--Las Cruces (LC), Sunland Park (SP), El Paso (EP), Abilene (ABI), Fort Worth (FW), and Plano (PL). LC and ABI have software that is accessed by the other 4 locations via VPN. There are WireGuard VPNs set up between LC and those 4 locations (SP, EP, FW, PL), and ABI and those 4 locations (SP, EP, FW, PL). There is also a WireGuard VPN connection between LC and ABI. LC and ABI have 2 internet connections. SP, EP, FW, and PL each have one internet connection.

    If the primary internet connection goes down at either LC or ABI and failover occurs to the secondary internet connection, is there a way to set up the WireGuard VPN connections so that they also failover without purchasing some 3rd party application?

    Thanks.

  • Ntop central gui or database

    2
    0 Votes
    2 Posts
    1k Views
    jimpJ

    That would be in the ntop config (not pfSense nor the pfSense GUI for ntop settings…), under its admin menu I believe.

    ntop can act as a netflow collector so I believe it is possible for it to centrally manage things like that, but that's a better question for an ntop forum or mailing list than here since it would not be specific to pfSense.

  • Strange problem with my new 2.1 config - NAT port forward strips URL

    6
    0 Votes
    6 Posts
    2k Views
    T

    No, when you NAT to 127.0.0.1, that means the NATing device - not the requesting device. At the NAT layer, VLANs do not matter - only IPs are involved at that point. Hope you find a fix for your issue, as I have been unable to reproduce it.

  • Asterisk WebGUI broken in Last release PfSense 2.1

    2
    0 Votes
    2 Posts
    2k Views
    R

    See here http://forum.pfsense.org/index.php/topic,47210.msg366422.html#msg366422

  • Squid3 coming up with accept failure: (23) Too many open files in system

    4
    0 Votes
    4 Posts
    2k Views
    K

    See - I don't actually know because I've never had to solve the problem.

    In cases like this I'd normally recommend checking the system tunables to see if its adjustable .

    If not, I would recommend either a cron job to reboot on a schedule or maybe a cron job to clear the issue as you stated.

  • Squid transparent manullay

    1
    0 Votes
    1 Posts
    690 Views
    No one has replied
  • Psotfix relay - lost connection after UNKNOWN from

    8
    0 Votes
    8 Posts
    5k Views
    B

    @c0mputerking:

    computer\king.ca is across town so exteral ip/network 
    Ok so i need to set notification diffently?? and direct to computerking.ca?? 
    I also would like systems on my LAN to use pfsense as relay to the main computerking.ca mail server
    is that what this setup is for?

    Yes, notifications go direct to the mail server for computerking.ca  They're being sent from the firewall so no need for them to pass through postfix.

    I don't really see the point of sending via postfix to the computerking.ca mail server but, yes, you could use it for that.

    The most common use for the postfix package is in front of a mail server on the LAN/DMZ to prevent spammers from hitting it.  However, you can use it to apply anti-spam filtering to outgoing mail from LAN PCs and servers.

  • FreeRADIUS & Cisco WLC 5508

    1
    0 Votes
    1 Posts
    2k Views
    No one has replied
  • [SOLVED] Squid 3 Package - Reverse proxy

    3
    0 Votes
    3 Posts
    3k Views
    M

    @marcelloc:

    You need first to disable web gui redirect option on system-> advanced. Then try to follow reverse proxy menu options.

    Disabling the gui redirect helped - thanks. I now have the reverse proxy working, bit I didn't realize that to get the reverse proxy working I had to enable Reverse HTTP mode and bind onto port 80. I thought Reverse HTTP was for creating connections (reversing HTTP roles) not reverse proxying…

    Marked as solved. Thx

  • PfBlocker trouble with aliases

    5
    0 Votes
    5 Posts
    2k Views
    D

    PREfixed != appended. And iblocklists work just fine, P2P/gz format.

  • Exclusion URL blocking

    2
    0 Votes
    2 Posts
    1k Views
    T

    create group in Squidguard.

    Proxy filter –>Groups ACL then click add.

    There you can manipulate users about their access.
    Just put the IP of certain users at Client (source) field.

    what i have in my pfsense is a group for admin and group for users.

  • Sort service will no longer start (2.9.4.6 pkg v. 2.5.9)

    4
    0 Votes
    4 Posts
    1k Views
    bmeeksB

    @arch113:

    @asterix:

    Uninstall.. make sure you un-check the option to save settings. Reboot. Do a clean install and re-configure Snort.

    That worked…  I hope I dont have to do that too often......

    If you upgrade to 2.1-RELEASE of pfSense these kinds of issues very likely will not happen anymore.  The 2.1 code base uses PBI to manage packages.  This is a huge improvement over the TBZ process in 2.0.x.  Under the old system, any update of a package runs the risk of overwriting some critical shared library with a different version than might have been placed there by existing packages.  So in that case something will break.

    Under the 2.1 code base with PBI, each package gets installed in the equivalent of its own "chroot jail" (not a perfectly accurate analogy, to be sure, but close enough for this discussion  ;D ).  This way each package can have its own private copy of "shared" libraries.  In effect they really are not shared anymore.  This prevents the problem where one package overwrites some critical library used by a different package.

    Bill

  • Snort blocks IP's regardless of the blocking settings

    6
    0 Votes
    6 Posts
    1k Views
    bmeeksB

    @fragged:

    2.0.3 is the minimum supported version for the current Snort package from what I've gathered from bmeek's posts.

    Yes, fragged is correct about the pfSense version.  Sorry I did not notice your pfSense version in your original post.  Upgrade to at least 2.0.3, and 2.1-RELEASE is even better.

    Bill

  • Make new packages with pbi

    7
    0 Votes
    7 Posts
    2k Views
    R

    OK thanks.

  • Postfix - where to setup the you are not me option?

    6
    0 Votes
    6 Posts
    2k Views
    marcellocM

    Many spams send a correct header but on mail change sender info on mail data.

    on my setup I do not use the ^ on helo info

    my domain restrictions are placed on  acls  helo and sender field

  • Squid Non-Transparent Upstream Proxy – Bind to VIP?

    3
    0 Votes
    3 Posts
    1k Views
    marcellocM

    Great workaround!  :)

  • Squid Whitelist Not Working

    2
    0 Votes
    2 Posts
    2k Views
    marcellocM

    @tgordon:

    I have squid 2.7.9 pkg v.4.3.3 installed on PFSENSE in transparent mode with squidGuard 1.4_4 pkg v.1.9.5. I cannot get the whitelist to work under the access control section of the proxy. It does work if I put the domain names in the General section under "Bypass proxy for these destination IPs". This is not ideal though as it does not work for sub domains, so I have to add all possible sub domains to this line as well.

    while using squiguard, you need to include it on it's acls as all requests will be forwarded to it.

    @tgordon:

    Also, this is only a 1 line text box, so it is getting very long.

    You can also include an alias name on this field

  • Updated: Munin-node on PFsense 2.0.x

    5
    0 Votes
    5 Posts
    3k Views
    R

    Cool!

    I think it deserves a dedicated pfSense package…

  • Squidguard url db?

    2
    0 Votes
    2 Posts
    868 Views
    jimpJ

    You should update it periodically. A cron job is not recommended unless you know for sure the URL source allows periodic fetching. Some of them state they do not allow it, or say it's frowned upon, etc.

  • Lcdproc, port not listed

    7
    0 Votes
    7 Posts
    2k Views
    R

    Looks like when I upgraded to the newer version it changed my connection type.  I changed it back and it looks to be working.

    Thanks

  • Squid to throttle downloads based on size

    5
    0 Votes
    5 Posts
    2k Views
    M

    It limits my entire connection though.

Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.