I tried every combination. OSFP. Gateway group. Gateway group AND OSFP.

One try had the result the one site to work from the one ιinteface and the other site from the other but nor this is what I want.

I did not know i needed to do that.

But that did the Trick!

Thanks!!

I tried all the combinations of the following posts but no success  ???

http://forum.pfsense.org/index.php/topic,24436.msg126273.html
http://forum.pfsense.org/index.php?action=printpage;topic=39328.0

I have 2 openvpn tunnels. I have gateway group. But the traffic goes to one of them and not balanced  ???

Is there anyone who managed this to tell me the recipe? I worked on this scenario about 10 hours but I didn't manage to succeed the desired result.

tomato 192.168.1.2

internet router 192.168.2.1
router assigns 192.168.2.100 to tomato wireless client

pfsense LAN 192.168.1.1

–-----
on the desktop i do:
gateway 192.168.1.7
dns "opendns"
and voila

same thing doesn work on pfsense:
i tried
WAN IP: 192.168.1.70
gateway: 192.168.1.7
no go

The default gateway of the firewall does not change in 1.2.3, so traffic originating from the firewall itself will fail when the WAN is down. You do need to specify a LB gateway on matching LAN rules for them to failover. 2.0 can be configured to switch the default gateway, and has improved routing and LB capabilities. I would recommend reading up on load balancing in 2.0 and switching to that version.

Oh, i see..

But my pfsense has no problems to edit route which i created.

@lucassimionato:

Hi, im having one similar problem, I Have 2 WAN and only one LAN, but some internal addresses i'd like to redirect to one specific WAN, for example:

WAN1 –-  192.168.1.10, 192.168.1.11, 192.168.1.12

WAN2 ---  192.168.1.13, 192.168.1.14, 192.168.1.15

how can i do this on pfsense 2.0 ???

create an alias, which contains half of your clients
Create rule on lan, where you apply this alias as source and in advanced settings select another gateway

Awesome, Exactly want I needed. Thanks buddy!

That makes sense in a LAN to WAN situation, but this is LAN to LAN situation where each LAN has an interface on the same pfSense device.

I haven't used bandwidthd in a while, but have you observed some sort of performance issues while on the RR pool? (Not just the graph, but whining users, etc) Oh, and make sure to point https to a failover pool and not a balancer pool.

I have such a config working with pfsense…
What does your PPPlog say?

Status -> System Logs -> PPP

D'oh, indeed.

Thank you.

It's not working after an upgrade of PF2 from 1.2.3 to 2.0…

What am I doing wrong.

All the settings is the same but PF2 is complaining about my gateway that routes traffic to RW1 that it is on the wrong subnet...

The settings is exactly the same as in PF2(1.2.3) but now it's not accepting the gateway that I've been using.

Should I create some kind of VLAN-interface or where is the problem?

I'm trying to set up the routing from PF2-lan to RW1...

Choose which interface this gateway applies to.
LAN net B

Name
Gateway1

Why must VPN1-lan-if be on the same subnet to make PF accept this?

Rebooting worked.

Not sure what you mean with source routing, but yes you can route traffic based on the source address.
In pfSense the term would be "policy routing".