Beta 4 has major issues.  If you are not cvs_sync.sh releng_1 your copy then it's broken on beta4.

The rest of the stuff I had already checked on, but somehow I neglected to do a recent speed test. Sure enough, the line tested at 230 Kb up, not the 256 I used to be getting when I checked it a couple months ago. After adjusting that, everything seems to be running a lot smoother. Thanks for the advice!

either at diagnostics>command or at the local shellmenu or ssh after exiting it with option 8.

@bruor: i also had this bug,  noticed that i was getting drops on my voip phone, and that things were not going into the voip outbound queue,  i have run the cvs sync to releng_1 and will post results here in the next day or so. You also need to rerun the traffic shaper wizard.

FAQ. http://faq.pfsense.com/index.php?action=artikel&cat=10&id=97&artlang=en&highlight=per%20user

@hoba: my adsl2+ 16mbit/s down, 1 mbit/s up plots digging a trench and installing network to hoba's house

May be need insert Queue ID - unique field, what create self value only with new Queue? Value format can be, for example, 'queueXX' All rules must be use this field for references to this queue. This really?

Feel free to submit patches against -HEAD to get this included.

Sorry, It was a notice mostly for users not developers. After syncing with RELENG_1 cvs everything works fine. Outgoing traffic shaping too. Thanks.

Nor can we sync dummynet rules to ALTQ :)  No, this will require significantly more effort. –Bill

Thks. I shall try several tests Use it at your own risk, no support will be given, yadda, yadda. Yes, I understand that this quits of frames of the project. But i very much need for filtering bridge & shaper May be there is other way for join 2 subnets one range? Without use the bridge, but filtering and shaping traffic? This structure to my network (10.62.0.0/24: 10.62.0.1-inet router + about 10 hosts) <-WAN intf-> pfSense <- LAN intf -> (10.62.0.0/24: all other hosts) All traffic between left and right subnets can be go without any nat but any protocols i want directing with rules & shaping Any advice(idea)?

First run the shaper to get a basic config. Then create queues for all the servers with an upperlimit of 5,2,1,2 mbit/s. Add rules that assign each server IP to one of the queues. To get started "abuse" the voipqueue for one of the servers (enter the Server IP at the VOIP page when running the Wizard). After the wizard has finished uncheck the realtime and add an upperlimit instead to the created voipqueues. Also lowering the priority makes sense. Then create a pair of these rules for each of your servers. Apply the settings and reset states before you test your new config.

@datafirm: Still seeing issues on latest releng_1.  Can you post to this thread once a fix has been committed. Thank you! Hmmm, we commit'd something yesterday.  I'll see what more needs to be done. –Bill

I'm not too convonced that this is working under all conditions though the voip traffic shows up in the right queues at LAN and WAN. Need to do some more tests soon but yes, I only used the wizard along with local lan phones as VOIP-Alias.

This would also be useful for me.. But one of the lines can be shaped still right, which is better than none, if VoiP could be forced down the shaped line, UNLESS the shaped line is down, then that'd be fine.

@dvserg: May be possable adding more (2-3) specific wizards to pfSence? existing wizard per users wizard etc.. Give it a shot. –Bill

@mwalsh: I am getting the following error (BETA3-PLUS-11548-PLUS-11567): Acknowledge All    .:.    04-21-06 07:34:04 - [filter_load]There were error(s) loading the rules: pfctl: the sum of the child bandwidth higher than parent qwanRootpfctl: linkshare sc exceeds parents sc/tmp/rules.debug:31: errors in queue definitionpfctl: the sum of the child bandwidth higher than parent qlanRootpfctl: linkshare sc exceeds parents sc/tmp/rules.debug:32: Syntax error in config file: pf rules not loaded The line in question reads [ the sum of the child bandwidth higher than parent qwanRootpfctl]:      .:. I have tried re-running the traffic shaper and have reduced the Voip settings to almost nothing but I am still getting it. Any help would be greatly appreciated Make sure you put the correct bandwidth in for up/down speeds on the second screen in the wizard. –Bill PS. Beta 4 is out, older releases are unsupported

@nima.m: In Traffic Shaper section, When you press the button "Remove Wizard" or pressing the tab "EZ Shaper wizard" it will remove your existing shaper rules and queue completely. Can you please put a messagebox asking the user if they really want to proceed before doing that ? During the last 3 days, I pressed those button/tab by accident many times and was forced to begin from the beginning. EZ Shaper wizard does have this warning (don't click next before reading the text on the screen!).  The other item we can put a javascript warning on I 'spose. –Bill

@hadi57: hi, one of my clients is able to use limewire after i setup the trafic shaper, how to stop limewire please? thank you Unsurprising.  It's a shaper, not a blocker. –Bill