Is this really the extent of the help on this forum?

It works … thanks to Boolah.

Best Regards

I have the same issue with a BCM4306

The firmware cannot be loaded (firmware table is full)
Seems that this patch should be applied  ….

http://fxr.watson.org/fxr/ident?im=10;i=FIRMWARE_MAX
http://lists.freebsd.org/pipermail/svn-src-all/2010-March/021027.html

Where can I find an How to patch and compile my own kernel for pfsense 2.0 ?

Not sure those instructions are for a pfsense 2.0 ?  http://devwiki.pfsense.org/DevelopersBootStrapAndDevIso ?

Thanks in advance
Etienne

@Dario84:

Thanks for you answer.

The reason of my question not is avoid web tracking, but I have to connect to a vpn server that allow just one client connection per user.

So if I use pf sense as vpn local server (or vpn gateway?) I can connect to this vpn more computer, and at the vpn provider i appear as one client.

Is possible?

thanks!

I believe the limitation set by the provider actually refers to the VPN connection rather than the number of clients.
i.e.  You're limited to 1 VPN tunnel into the server for 1 user account.
In other words, if you have pfSense tunnel into the server and use the link as a gateway, there should be no issues with multiple clients that are NAT through the link.

Thank you very much for your response. problem solved. There was the grounding problem.

Thanks Jim, it's been up OK since then… I'll post again if it dies once more.

@nnicanor:

This option is already enabled since beta version,  all office have internet connections and direct data channel with one router that is configured in static route configuration of pfsense 2.0,  i dont have problem with this configuration with 1.2.1.

See my last post. You don't have that set somewhere where you have asymmetric routing.

you have other VLANs that work fine? Where are you seeing that ARP, on the VLAN interface itself or the parent? May also want to check the parent with -e on tcpdump to ensure those have the correct VLAN tag from the switch.

I think we can consider it solved :)

If any problem occurs, I will post.

I will post the images soon as well.

Best regards and thank you all for your patience.

Kostas

That's handled on the DHCP Server page.

Should be ok now, that's from the open-vm-tools package.

https://github.com/bsdperimeter/pfsense-packages/commit/bf6f1542ec79dcf5e363732f9c902b6bbd4b5535

@Technyne:

@Metu69salemi:

but another hand, if you're afraid of hdd wearing out, then nano is better solution.

how heavily is the drive utilized with the full version vs. the Nano Version?

Thanks again for you replies.

In nano, the whole system is loaded into RAM and run from there with writes to the disk only happening when configuration is saved.

Well i may know something about cisco aironets, i did my bachelor thesis based on those and have worked little over year with those devices.
just today i configured 9 pieces 1242ag's.

So what you wanted to see

Hmm, I tested it at home with my small home router and the same issue.
so I don't think it is related to pfsense, squid or loadbalancing.
it's just the damn webpage ;)

Just for argument's sake, I would down the Untangle VM and see if it makes any difference, and would do all further testing with Untangle down.  Once you get the issue sorted, THEN I would revive Untangle.

I seem to be answering my own questions today, but just in case anyone else stumbles across this:

I opened a command line prompt and issued a simple: ntpdate timeserver

That stepped the clock forward into sync and hopefully the ntp daemon will now keep it that way. Though I've yet to figure out why it went out of sync in the first place, something to keep an eye on I guess.