@dlogan , there is also a possibility of some hardware probs that could make a change on the settings, eg if there is some power shortage or outage in the hardware components. Was there a smb relay attack? If so try to enable smb signin on all devices, disable ntlm authentication on network.

@gertjan Its exactly my own error : I map port 25 to 161. I modified it to 25 and now it works. PS : my server is host in a datacenter. Not at home :) ( Merci beaucoup mon cher ami. Quelle erreur de debutant de ma part ohlala :D )

@gertjan Nothing but what I sent. In front of this is only the 500 lines you have already seen. PFSense is almost on by default. I made only minor adjustments. If necessary, I will send an xml here. However, I would have to cover private data from xml, e.g. pppoe etc.

Thanks very much! The ISP switch is over a week away, and at least I know to avoid using the Wizard again.

@davynelis-it-nl said in Upgrading failed: The install is on a VM . ;) It doesn’t change the thing, now you can easily add anything or replace

Hi :) @viragomann Its works after I enabled "NAT Reflection" @johnpoz I have removed the public access to my NAS server and made it only available from LAN and openVPN.. @Gertjan Thanks for explaining this to me.. :) It all works now :) Thanks

@ibbetsion You must have something stuck in there somewhere. I just looked on a spare pfsense box I've got, with no traffic shaping setup at all, and this is the result I see in Diagnostics->Limiter Info Limiters: No limiters were found on this system.

Old topic, I know, but I have a similar need that I don't think is handled by the GUI. In my case, I want to create a VM to mirror my production firewall (hardware), down to the interface names. While I can manually change the interface names via ifconfig (e.g. ifconfig em0 name igb0), how do I make this persistent? Surely some script must run at startup that could do this, right? My use case is so I can test big config changes and updates before deploying for reals, and not have to mentally map things between the two, likely screwing something up along the way. Thanks...

@xplozia The problem persist, but less often

Hi @jimp I have encountred another problem. I am doing these tests in pfSense 2.5.1.r.20210322.0300 version. When I export the OpenVPN User Configuration file from "VPN > OpenVPN > Client Export Utility > OpenVPN Clients > "USER" > Bundled Configurations > Archive" It generates a .zip file that contains three files: xxxxxx.ovpn file xxxxxx.p12 file xxxxxx.key file Are the xxxxxx.p12 file and the xxxxxx.key file the same that I can generate from "System > Certificate Manager > Certificates > "USER" > Export Key / Export P12"? I think that not are the same because this: I have generated a .zip OpenVPN User Config file. I have created a OpenVPN connection in a client with this file and works fine. I have changed the date of the pfSense to a date after the expiration date of the certificates of the CA, the OpenVPN Server and the User. I have changed the date of the Client to the same date of the pfSense. Evidently, the VPN Connection in the Client doesn't work because the Certificates have expired. I have renewed the certificates of the CA, the OpenVPN Server and the User. I have exported the .p12 and the .key files from "System > Certificate Manager > Certificates > "USER" > Export Key / Export P12" I have replaced the old .p12 file by the new .p12 file in the Client and the VPN Connection works well again. Then, I have replaced the old .key file by the new .key file in the Client and the VPN Connection doesn't work, not connects. That is, if I replace only the .p12 file the VPN Connection works but if I replace both files the VPN Connection doesn't works. I have exported a new OpenVPN User Configuration file with this new date from "VPN > OpenVPN > Client Export Utility > OpenVPN Clients > "USER" > Bundled Configurations > Archive". I have create a new OpenVPN Connection in the Client with this file and works fine. I have verified that the .key file that contains the .zip file and the .key file exported from Certification Manager have diferent sizes. If I replace the .p12 and the .key files of the old VPN Connection with the .p12 and the .key files contained in the new .zip file, the VPN Connection connects without problems. Best regards

@zoqask Just replying to myself having thought a little more about this. I suppose the hacky method would be remove the old card. Factory reset the box then restore the config and re-assign the new adapters to the appropriate rulesets. If there is a more logical way then by all means make the suggestion thanks.

@stephenw10 just to follow up on this whilst I have an open question in general. It was the clients broadband that was at fault. Having done some digging they got the line back up and PF sprung to life. That site has had up times of nearly a year before. A real testament to the kit and OS (PF).

@s0m3f00l said in SG3100 random PHP crash - 2.4.5-RELEASE-p1: /usr/local/www/diag_command.php Hello! I dont think this php script will run randomly. I have only seen it run from the gui Diagnostics -> Command Prompt menu item. Whatever command was run probably generated a huge amount of output for the browser and ran php out of memory. Check... clog /var/log/nginx.log | grep diag_command.php ... to see when that command was run last and maybe by whom. John

@antonio-briguglio Glad you finally got it sorted.

Looks like igb3 works exactly as expect there then.

@biggyk Check the system log. It may possibly provide hints.

@mlaustin said in Shutdown corruption: @stewart The current one is Intel. The other one I purchased is Intel Pro 1000. They are not Realtek cards. I'm curious since you said the 4-port card was inexpensive so I was wondering what model you purchased from where. Glad you got Intel, though I've never experienced real issues with Realtek cards personally.

@azdeltawye Me too, except I use apcupsd.