Cannot connect to netgate servers during fresh pfsense install
-
@stephenw10 I'm installing the netgate-installer-amd64.img via USB.
I get the same errors @vdiago is getting.
-
@undrwater Same NTP errors logged. Also unable to query ntp manually?
-
@stephenw10 That's correct. In my case at least, when exiting the install script, I don't have access to internet. If I manually set the gateway, I can get internet in the shell. Once I restart the install script, it fails as described here. Another point of possible interest is the following message:
unknown dhcp option value 0x7dI have been given access to an offline installer.
-
Mmm, so in your case it never actually pulls a dhcp lease correctly?
-
@stephenw10 I can neither confirm nor deny. That is just one of the messages. If i were to drop to a terminal from the install script, there was no gateway, so no internet access. If i defined a gateway, I'd get internet access. However, if I restarted the install script, it seems it would clear the network, and lose internet access again.
I had mine set up with a LAN port connected to the existing router. No WAN connection.
The offline installer has allowed me to install / update the unit, and it is working as expected now.
Thanks! Let me know if there's any other info I might provide.
-
Can you post a link for the offline installer?
-
@undrwater said in Cannot connect to netgate servers during fresh pfsense install:
I had mine set up with a LAN port connected to the existing router. No WAN connection.
Ah, OK. You should still have been able to add the existing router as a gateway in the installer to make that work. I assume that's where you were adding the gateway in the CLI.
-
@stephenw10 The installer did not give me an option to add a gateway. At least not an obvious one. I attempted to look.
Maybe a check for a gateway could be included in the script.
-
Hmm, should be there if you configure the interface as static IP.
-
@stephenw10 I tried with both DHCP and static. In neither case was I informed that a gateway could not be established. Rather, the script just failed out. The script could possibly ask the user if they would like to identify a gateway, as one could not be found.
Thanks for listening!
-
Hmm when you set an interface as static you should see the option to set a gateway. When you select it you see:
-
@stephenw10 I don't recall. Perhaps it was presented, but I reduced its importance because the install script failed out anyway. If I have the appropriate time, I can test it again.
-
Hello @stephenw10 ,
I have the same issue with the same ntp failure.
Tried ntpdate -q with error "no servers can be used, exiting" ...Did you find a solution to this ?
-
It's fixed in the coming installer build.
-
@stephenw10 Hello! Great news! Do you have an estimation on when will it be available ?
-
As soon as possible! I can't be more accurate than that though. We are fixing and testing as fast as we can.
-
This post is deleted! -
@stephenw10 said in Cannot connect to netgate servers during fresh pfsense install:
We are fixing and testing as fast as we can.
Hi, any news when this will be fixed?
-
Still as soon as possible. It's fixed in internal builds but we need to complete testing on that and a raft of other fixes.
-
What a S&^t show - someone needs their head read trying to make an online only router installer. Have to be the most $$ driven decision ive seen from Netgate to date.
