Subcategories

• Cache/Proxy

  Discussions about packages which handle caching and proxy functions such as squid, lightsquid, squidGuard, etc.
  4k Topics

  21k Posts

  D

  I recently start have trouble saving my HAProxy configuration due to a error. It keeps adding clientca_ in front of the SSL offload certificate name. On file level this file does not exist! I tested with both HA Proxy plugins, the regular and dev version. I tried to regenerate the SSL (Lets Encrypt) but this keeps happening. [ALERT] (45623) : config : Couldn't open the ca-file '/var/etc/haproxy_test/clientca_shared-frontend.pem' (No such file or directory). [ALERT] (45623) : config : parsing [/var/etc/haproxy_test/haproxy.cfg:28] : 'bind 0.0.0.0:443' in section 'frontend' : 'ca-file' : unable to load /var/etc/haproxy_test/clientca_shared-frontend.pem Does anybody have the same behaviour? to be clear I have the 25.07-RC running. The relevant part of /var/etc/haproxy_test/haproxy.cfg frontend shared-frontend bind 0.0.0.0:443 name 0.0.0.0:443 ssl crt-list /var/etc/haproxy_test/shared-frontend.crt_list ca-file /var/etc/haproxy_test/**clientca_**shared-frontend.pem verify required crl-file /var/etc/haproxy_test/**clientcrl_**shared-frontend.pem
• IDS/IPS

  Discussions about packages whose functions are Intrusion Detection and Intrusion Prevention such as snort, suricata, etc.
  2k Topics

  16k Posts

  C

  @rlrobs Yes it’s still working fine here.
• Traffic Monitoring

  Discussions about packages that handle bandwidth and network traffic monitoring functions such as bandwidtd, ntopng, etc.
  571 Topics

  3k Posts

  K

  @pulsartiger The database name is vnstat.db and its location is under /var/db/vnstat. With "Backup Files/Dir" we are able to do backup or also with a cron.
• pfBlockerNG

  Discussions about the pfBlockerNG package
  3k Topics

  20k Posts

  M

  I resolved this by accepting the T+Cs via https://www.maxmind.com/en/accounts/1205389/geolite2/eula
• UPS Tools

  Discussions about Network UPS Tools and APCUPSD packages for pfSense
  101 Topics

  2k Posts

  D

  @jhg said in NUT fails to start after 2.7.2 -> 2.8.0 upgrade: Interesting. I would have thought the initial reboot, which occurred as part of the upgrade, would have done the trick, but it took a second reboot, just now, to get things working. Glad you have it sorted. There was no difference in the output of usbconfig show_ifdrv at any point -- before or after unplugging/replugging the USB cable, nor after rebooting. ... Question: What would tell me whether or not a driver was loaded? If there were an attached driver, it should have shown up with the show_ifdrv command. If you use the command and look at the other usb devices, I think they will show attached drivers. I don't expect to see a driver attached to the ups, because there is a quirk that tells the OS to ignore that device (and not attach a driver). Look for idVendor and idProduct in the above output. The Vendor ID for your device is 0764, which corresponds to Cyber Power Systems, and the Product ID for your device is 0601, which is registered as "PR1500LCDRT2U UPS" (don't sweat an exact match for the name). You can see the quirk with the following command: [25.07-RC][root@fw]/root: usbconfig dump_device_quirks | grep 0764 VID=0x0764 PID=0x0005 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE VID=0x0764 PID=0x0501 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE VID=0x0764 PID=0x0601 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE [25.07-RC][root@fw]/root: Your device is third on the list. The HID_IGNORE quirk says to ignore the device and not attach a driver. @jhg said in NUT fails to start after 2.7.2 -> 2.8.0 upgrade: You might consider adding this resolution to the release notes for 2.8. LOL... sorry, I don't have input to the release notes (I don't work here). While I wrote and maintain various packages, including NUT, I'm still just a volunteer. Most packages are actually written by volunteers.
• ACME

  Discussions about the ACME / Let’s Encrypt package for pfSense
  493 Topics

  3k Posts

  G

  @EChondo What's your pfSense version ? The instructions are shown here : [image: 1753262126227-1acdc586-cb29-4148-9e36-81ade4e5e60c-image.png] A restart of a service will start by re creating their config files. If a certificate changed, it will get included. When the process starts, it will use the new certificate. @EChondo said in Issue with ACME Certificates Refresh & Restarting HAProxy: I haven't been able to confirm if the above works(mine just renewed, don't feel like doing it again just to test), so we'll see in 60 days I guess. No need to wait x days. You can re test / renew right away, as you are 'allowed' to renew a couple (5 max ?) of times per week.
• FRR

  Discussions about the FRR Dynamic Routing package on pfSense
  294 Topics

  1k Posts

  J

  @div444 i'm finding the same - did you find a solution or did reverting fix it? Hoping there is a patch fix or something to get it working! Rather not rollback if i can avoid it
• Tailscale

  Discussions about the Tailscale package
  90 Topics

  578 Posts

  T

  Re: How to update to the latest Tailscale version? I am on latest released Netgate 6100 pfSense PLUS v24 ( pfSense_plus-v24_11_amd64-pfSense_plus_v24_11 ) pkg config abi FreeBSD:15:amd64 pkg -vv | grep -A 3 "pfSense:" pfSense: { url : "pkg+https://pfsense-plus-pkg.netgate.com/pfSense_plus-v24_11_amd64-pfSense_plus_v24_11", enabled : yes, priority : 0, cat /usr/local/etc/pkg.conf ABI=FreeBSD:15:amd64 ALTABI=freebsd:15:x86:64 PKG_ENV { SSL_CA_CERT_FILE=/etc/ssl/netgate-ca.pem SSL_CLIENT_CERT_FILE=/usr/local/etc/pfSense/pkg/repos/pfSense-repo-0001-cert.pem SSL_CLIENT_KEY_FILE=/usr/local/etc/pfSense/pkg/repos/pfSense-repo-0001-key.pem } This firewall is obviously running on FreeBSD 15 no longer on 14. But can I use the freshports link for FreeBSD 14 amd64 quarterly which is at tailscale 1.86.2 or can I only go up to version tailscale 1.84.2_1, and need to wait until they have a version of tailscale 1.86.2 or higher for the FreeBSD 15? Would it be good enough to tell it to ignore the OSVERSION? export IGNORE_OSVERSION=yes Note: use of 14 and not 15 ? pkg add https://pkg.freebsd.org/FreeBSD:14:amd64/quarterly/All/tailscale-1.86.2.pkg service tailscaled restart tailscale up
• WireGuard

  Discussions about WireGuard
  690 Topics

  4k Posts

  J

  I've read through some other posts about this, but they either didn't say whether the proposed solution worked or they were very convoluted and difficult to understand. Here is our scenario: We have 6 locations--Las Cruces (LC), Sunland Park (SP), El Paso (EP), Abilene (ABI), Fort Worth (FW), and Plano (PL). LC and ABI have software that is accessed by the other 4 locations via VPN. There are WireGuard VPNs set up between LC and those 4 locations (SP, EP, FW, PL), and ABI and those 4 locations (SP, EP, FW, PL). There is also a WireGuard VPN connection between LC and ABI. LC and ABI have 2 internet connections. SP, EP, FW, and PL each have one internet connection. If the primary internet connection goes down at either LC or ABI and failover occurs to the secondary internet connection, is there a way to set up the WireGuard VPN connections so that they also failover without purchasing some 3rd party application? Thanks.