1. WAN is the only required interface now. This for appliance purposes.

2. We will take this into consideration. Good point.

3. This is a bug when switching from automatic generated rules to manul rules. We'll add it to the fix list.

laag is a ethernet trunk. It can not be used for the purpose of aggregating internet connections.\

One error I been seeing alot is:
Warning: Invalid argument supppiled for each () in /etc/inc/filter.inc online 360.

I also seen error concerning the EM0 network adapter.
RC

apinger

–Bill

Turn off as many of the dashbords as you can.  it speeds it up, with the fewer it has to get status on.
RC

Looks like it switched to serial console.

@GruensFroeschli:

Aha. A bit more info before post is generally not a bad idea…
There is no pfSense 2.0 or 2.1

He comes from the future!  ;D

Use virtualDev = "e1000"

;D

You will have to go into the update setting area and tell it to ONLY look at the dev (1.3Ax2) updates.

Uncheck all Random Early Detection flags from the queues.

stopped again on 8/17 and no snaps since then. please keep it running.
oops, 1.2.1 snaps also have some glitches too.

Hello perry….

my dns its ok... btw which dns u give to me, its open dns

I pull the current image down setup on the server then run the update.  I do that in the AM.  I am using a 256 MB flash drive now.  trying to limit the total size and power requirements.  Trying to find a 1U/2U case that I can put just the systemboard and flash drive in.

I can run it headless it's  a tyan server board.  i want to use this as a test box.
rc

Hi af

whisch is a correct for ip monitor should i put gateway ip or dns ip

regards

Kambeeng

yeach i have tray also same like u.. but after that i can not open any index page  :(

kambeeng