Subcategories

• Cache/Proxy

  Discussions about packages which handle caching and proxy functions such as squid, lightsquid, squidGuard, etc.
  4k Topics

  21k Posts

  N

  Can I use pgblockerng aliases in Haproxy?

  80758505-9bad-4dad-a80b-c159be1045a2-image.png

  If it was a firewall rule, typing pfb would produce a dropdown to select.

  Here it has to be written, but will it work? Is it supported?

• IDS/IPS

  Discussions about packages whose functions are Intrusion Detection and Intrusion Prevention such as snort, suricata, etc.
  2k Topics

  16k Posts

  C

  @bmeeks So after upgrading to the newest PfSense 2.8.0 everything is now working like a charm!

  Suricata no longer seems to strip off tags like it did before! Which means I can now use my network segmented by VLANs and still use the benefits of Suricata Inline IPS! Very niiize!

  I checked in the Alerts section and it is indeed generating the correct alerts from the different VLAN sections, I put Inline IPS on the parent interface of all the VLANs.

  I assume this is because the FreeBSD version is also updated with the new PfSense 2.8.0 version?

  Because before, as soon as I selected Inline IPS mode, my entire VLAN tagging would break and nothing was reachable until I switched back to Legacy mode.

• Traffic Monitoring

  Discussions about packages that handle bandwidth and network traffic monitoring functions such as bandwidtd, ntopng, etc.
  571 Topics

  3k Posts

  K

  @pulsartiger
  The database name is vnstat.db and its location is under /var/db/vnstat.
  With "Backup Files/Dir" we are able to do backup or also with a cron.

• pfBlockerNG

  Discussions about the pfBlockerNG package
  3k Topics

  20k Posts

  R

  @Gertjan
  Hello,
  Thank you.
  I had exactly the same issue, and your solution helped me fix it.

  Ask ChatGPT

• UPS Tools

  Discussions about Network UPS Tools and APCUPSD packages for pfSense
  101 Topics

  2k Posts

  D

  @jhg said in NUT fails to start after 2.7.2 -> 2.8.0 upgrade:

  Interesting. I would have thought the initial reboot, which occurred as part of the upgrade, would have done the trick, but it took a second reboot, just now, to get things working.

  Glad you have it sorted.

  There was no difference in the output of usbconfig show_ifdrv at any point -- before or after unplugging/replugging the USB cable, nor after rebooting.
  ...
  Question: What would tell me whether or not a driver was loaded?

  If there were an attached driver, it should have shown up with the show_ifdrv command. If you use the command and look at the other usb devices, I think they will show attached drivers. I don't expect to see a driver attached to the ups, because there is a quirk that tells the OS to ignore that device (and not attach a driver).

  Look for idVendor and idProduct in the above output. The Vendor ID for your device is 0764, which corresponds to Cyber Power Systems, and the Product ID for your device is 0601, which is registered as "PR1500LCDRT2U UPS" (don't sweat an exact match for the name).

  You can see the quirk with the following command:

  [25.07-RC][root@fw]/root: usbconfig dump_device_quirks | grep 0764 VID=0x0764 PID=0x0005 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE VID=0x0764 PID=0x0501 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE VID=0x0764 PID=0x0601 REVLO=0x0000 REVHI=0xffff QUIRK=UQ_HID_IGNORE [25.07-RC][root@fw]/root:

  Your device is third on the list. The HID_IGNORE quirk says to ignore the device and not attach a driver.

  @jhg said in NUT fails to start after 2.7.2 -> 2.8.0 upgrade:

  You might consider adding this resolution to the release notes for 2.8.

  LOL... sorry, I don't have input to the release notes (I don't work here). While I wrote and maintain various packages, including NUT, I'm still just a volunteer. Most packages are actually written by volunteers.

• ACME

  Discussions about the ACME / Let’s Encrypt package for pfSense
  493 Topics

  3k Posts

  G

  @EChondo

  What's your pfSense version ?
  The instructions are shown here :

  1acdc586-cb29-4148-9e36-81ade4e5e60c-image.png

  A restart of a service will start by re creating their config files. If a certificate changed, it will get included. When the process starts, it will use the new certificate.

  @EChondo said in Issue with ACME Certificates Refresh & Restarting HAProxy:

  I haven't been able to confirm if the above works(mine just renewed, don't feel like doing it again just to test), so we'll see in 60 days I guess.

  No need to wait x days.
  You can re test / renew right away, as you are 'allowed' to renew a couple (5 max ?) of times per week.

• FRR

  Discussions about the FRR Dynamic Routing package on pfSense
  294 Topics

  1k Posts

  R

  I had a similar issue with Routed VTI over IPsec recently. FRR lost its neighbors after rebooting or when a tunnel went down. It never re-discovered it automatically. Only restarting FRR (either in GUI or via CLI) brought the neighbors back.

  When I manually added those under the OSPF neighbors tab in the GUI it seems to solve the problem as well.

• Tailscale

  Discussions about the Tailscale package
  89 Topics

  574 Posts

  A

  Hello,
  I am unable to get the Tailscale package to work. The page at VPN > Tailscale > Authentication is stuck. It displays the error "Tailscale is not online," but also shows a "Logout and Clean" button, with no option to log in.
  link text

  This state persists even after performing the following troubleshooting steps:

  Rebooting the pfSense router.

  Completely uninstalling and reinstalling the Tailscale package multiple times.

  Clearing browser cache and using a private browser window.

  Toggling the main "Enable Tailscale" checkbox in the settings.

  Checking the logs, which show the service gets a "terminate" signal and shuts down cleanly; it does not crash.

  Manually trying to delete the state file with rm /var/db/tailscale/tailscaled.state, which failed because the file does not exist.

  It appears that the package's configuration is corrupted in a way that persists even after reinstallation. Can anyone advise on how to perform a complete manual cleanup of all Tailscale files and settings?

• WireGuard

  Discussions about WireGuard
  690 Topics

  4k Posts

  J

  I've read through some other posts about this, but they either didn't say whether the proposed solution worked or they were very convoluted and difficult to understand. Here is our scenario: We have 6 locations--Las Cruces (LC), Sunland Park (SP), El Paso (EP), Abilene (ABI), Fort Worth (FW), and Plano (PL). LC and ABI have software that is accessed by the other 4 locations via VPN. There are WireGuard VPNs set up between LC and those 4 locations (SP, EP, FW, PL), and ABI and those 4 locations (SP, EP, FW, PL). There is also a WireGuard VPN connection between LC and ABI. LC and ABI have 2 internet connections. SP, EP, FW, and PL each have one internet connection.

  If the primary internet connection goes down at either LC or ABI and failover occurs to the secondary internet connection, is there a way to set up the WireGuard VPN connections so that they also failover without purchasing some 3rd party application?

  Thanks.