Exactly.. Many times users says they did X when they really did Y.. Maybe you are blocking rfc1918 on your guest interface? So you setup plexserverip as an alias? maybe that is not working - view your alias in the table section under diag. Does it list the correct IP? Simple sniff is always good - since on your lan.. Do you see the traffic going to your plex server.

Thanks, I'm glad to hear there is a good reason for not respecting the redirect.

yes. I hope so. the complete ssh command works too, like: #ssh -A -p22 root@gateway pfSsh.php playback gatewaystatus Name Monitor Source Delay StdDev Loss Status WAN_PPPOE 9.9.9.9 79.227.208.185 24.827ms 0.337ms 0.0% none

It seems that the problem was in the PfSense version. I made an update and everything is working correctly

Jim Pingle did a very great Hangout for OpenVPN as a WAN, you can check it out on Youtube: https://www.youtube.com/embed/lp3mtR4j3Lw -Rico

Able to fix this by changing syslog-ng.inc $conf .= "{\n"; $conf .= "\tmaxsize 1024M\n"; $conf .= "\trotate $max_archives\n"; $conf .= "\t$archive_frequency\n";

Spoke too soon, had to power down to add a blanking plate (couldn't find enough when I initially built the box) and it still doesn't start up at boot or clicking start on the dashboard. It only starts if I go into the configuration and save it. I don't have to make any changes, just click Save.

The copy jobs will be between nas to vsphere and external. Probably it will be smb3, i did not decide yet. After removing the whole lagg config on pfsense and switch it works! I can work with that but i'm still interested why it did not work with lag...

I have been running unbound since before it was part of pfsense and an just an addon package - have never seen a hit from it.. It is rock solid in its performance - then again as I mentioned I would never "forward" my dns request I use it as intended which as a caching resolver.. If your concerned with your isp listening in on your dns - then send your dns requests through a vpn would be my suggestion. Trying to run dns over tcp so you can put it in a ssl tunnel is yeah going to be a performance hit on your typical dns udp query.

Very nice. It's waited this long, I'm sure it can wait a couple more weeks.

OK, so now go to the client PC or whatever it is and check its network settings to confirm that it is using pfSense DNS. If it is getting its network details from a DHCP server , then you need to ensure that this DHCP server is giving out pfSense LAN IP as the DNS for DHCP clients.

Hello! I had the same issue with my router and as it was said virtual interfaces solved the issue. VPN software was shown to be the most effective one. Though there's always a catch because some of them provide dynamic IP as well. Nord-VPN works for me but you might want to check reviews and compare different providers here's the source

Hi @viragomann, Thank you! you're the best. It works well. Kudos!

Did you renew your Gold subscription? The same thing happened to me, and it took me a day to realize that I forgot to renew Gold. Once I did that, everything started working properly.

@debom If your settings are different, try the settings below. In the Notification E-Mail auth password, enter your gmail password. The next step is VERY IMPORTANT. You MUST scroll all the way to the bottom of the page and click the Save button. Then click on the Test SMTP Settings button. The settings entered do not get used unless they are first saved. If it still does not work, you might have to go into your Google account security settings and allow less secure applications. I don't think this is necessary though. If you do allow less secure apps and it still doesn't help, don't forget to switch that setting back. https://support.google.com/cloudidentity/answer/6260879?hl=en [image: 1534436511203-e57d5a38-7a96-4e94-a047-081717253282-image.png]

Thanks this fixed it for me.

Hi, I do not know what the pfsense UniFi interface IP is as I just use 192.168.0.10 (which is reachable from UniFi 192.168.1.*) Could this be an issue? as devices are looking for it on 192.168.1? There is nothing setup on the DHCP page I uploaded previously, everything is blank apart from what you have already seen..

Contact netgate support, they will tell you if the wish to sell you a rebranded version