Categories

  • Discussions about TNSR

    465 Topics
    1k Posts
    A
    @Said.Fathy , Hi Said .. I'd strongly recommend Lawrence Systems' youtube channel... it's the best as far as pfsense is concerned.. from beginner to pro https://www.youtube.com/@LAWRENCESYSTEMS

  • Discussions about pfSense Software, click a category below

    121k Topics
    768k Posts
    stephenw10S
    That patch should apply to both 2.8.1 and 25.07.1. So it is working as expected on the primary node? When it's master?

  • Discussions about pfSense software packages

    20k Topics
    128k Posts
    B
    @lvrmsc said in The service show not running but client can connect to wireguard server.: Same here. It started after I installed 25.07. Same here too, came from fresh 2.8.1 installation and restored 2.7.2 config. The other topic I had opened before finding this: https://forum.netgate.com/topic/198449/25.07-release-amd64-wireguard-service-reported-stopped-yet-tunnel-trafic-clearly-is-ok (checked, have Watchdog Service disabled temporarily too) My wg_0 worked directly after reboot, wg_1 takes some minutes to established, but Wireguard Service marked as stopped (red) all the time. Some static routes defined on pfsense for wg_1 interface with gateway on the remote side, but still missing in system routing table after wg_1 established (ex.): ... php_wg[24929]: /usr/local/pkg/wireguard/includes/wg_service.inc: Static Routes: Gateway IP could not be found for 10.0.30.0/24 ... Therefore wg_1 isn't usable regarding related routes are missing. My work around currently: Disabling Peer assigned to wg_1 by GUI --> pfsense means (by error message) Wireguard not running ;-) and disables wg_0 related Peer too and Wireguard Service stopped in real --> Re-enable wg_1 related Peer --> Start Wireguard Service via GUI and it goes to green --> form now on all wg_1 related routes are in the routing table It seems behavior could routing table related because the error messages (above) starts at boot time before Wireguard Service is started... What is the situation on your sides? (Will check the situation with temporarily disabled static routes before next reboot)

  • Discuss pfSense in other languages

    43k Topics
    267k Posts
    E
    @JeGr said in Dyndns nach Update nicht mehr funktionell: Das ist nicht deprecated, sondern Viel Dank für deine Infos. Bin übers lange WE verreist und habe daher nur remote zugang zur pfsense. Dass ich deprecated schrieb liegt am Infotext in der pfsense selbst zum neuen if_pppoe Use if_pppoe kernel module for PPPoE client Checking this option will set the system to use the new if_pppoe kernel driver for PPPoE client connections. Keep it unchecked to use the deprecated PPPoE support from mpd5.

  • Information about hardware available from Netgate

    3k Topics
    21k Posts
    D
    @EG said in Netgate SG-4860 Fan Replacement: @d83 I just had to do this, the FOXCONN 5010 PVA050C12Q was a direct replacement. $4.92 on Ebay. Supposedly rated for Service life: 50000 hours, but I'll have to get back to you on that. Thanks, I expect an update in 5.7 years! Lol

  • Information about hardware available from Netgate

    44 Topics
    211 Posts
    AriKellyA
    It looks like unified web management could be coming soon. It would be great if it means easier control and management of all web services in one place. Let's see if any companies announce more details about it!

  • Feel free to talk about anything and everything here

    4k Topics
    19k Posts
    JonathanLeeJ
    Me too I like how it says Jonathan Lee 2100 haha
Copyright 2025 Rubicon Communications LLC (Netgate). All rights reserved.